Detector Switch
80,362 results

Item Price Seller
Touch Switch Touch Sensor Detector Switch for*LED Strip DC 5-24V 3A Light PR

Touch Switch Touch Sensor Detector Switch for*LED Strip DC 5-24V 3A Light PR

Category: Sensors & Motion Detectors
$8.89Ebay
Auto On/Off Security PIR Infrared Motion Sensor Detector Switch Wall LED Light

Auto On/Off Security PIR Infrared Motion Sensor Detector Switch Wall LED Light

Category: Sensors & Motion Detectors
$0.99Ebay
12M Outdoor Security PIR Infrared Motion Sensor Detector Switch 180° LED Light

12M Outdoor Security PIR Infrared Motion Sensor Detector Switch 180° LED Light

Category: Sensors & Motion Detectors
$6.99Ebay
12M PIR Infrared Motion Sensor Outdoor Security Detector Switch 180° LED Light

12M PIR Infrared Motion Sensor Outdoor Security Detector Switch 180° LED Light

Category: Sensors & Motion Detectors
$6.99Ebay
PIR Infrared Motion Sensor Detector Switch Wall LED Light Auto On/Off Black 2PCS

PIR Infrared Motion Sensor Detector Switch Wall LED Light Auto On/Off Black 2PCS

Category: Sensors & Motion Detectors
$10.98Ebay
5X12M Outdoor Security PIR Infrared Motion Sensor Detector Switch 180° LED Light

5X12M Outdoor Security PIR Infrared Motion Sensor Detector Switch 180° LED Light

Category: Sensors & Motion Detectors
$24.99Ebay
SXZM 1pcs 40mm PIR Infrared Ray Motion Sensor Switch time delay adjustable mode detector switching

SXZM 1pcs 40mm PIR Infrared Ray Motion Sensor Switch time delay adjustable mode detector switching

$2.95Aliexpress
12V/220-240V 360 Degree Security PIR Infrared Motion Movement Sensor Detector Switch Ceiling Mounted M10

12V/220-240V 360 Degree Security PIR Infrared Motion Movement Sensor Detector Switch Ceiling Mounted M10

$4.81Aliexpress
DC5V 12V 24V 5A PIR Sensor Switch Mini PIR Infrared IR Motion Sensor Detector Switch Module for LED Strip Light

DC5V 12V 24V 5A PIR Sensor Switch Mini PIR Infrared IR Motion Sensor Detector Switch Module for LED Strip Light

$2.83Aliexpress
1pcs 40mm PIR Infrared Ray Motion Sensor Night Home Outdoor Light Switch Time Delay Adjustable Mode Detector Switching

1pcs 40mm PIR Infrared Ray Motion Sensor Night Home Outdoor Light Switch Time Delay Adjustable Mode Detector Switching

$3.88Aliexpress
1pcs 40mm Adjustable PIR Infrared Ray Motion Sensor Time Delay Adjustable Mode Detector Switch For Home Lighting LED Lamp

1pcs 40mm Adjustable PIR Infrared Ray Motion Sensor Time Delay Adjustable Mode Detector Switch For Home Lighting LED Lamp

$3.80Aliexpress
ZINUO 20mm PIR Infrared Human Body Sensor Detector Switch Automatic Module infrared Sensor imports probe For Panel Ceiling lamps

ZINUO 20mm PIR Infrared Human Body Sensor Detector Switch Automatic Module infrared Sensor imports probe For Panel Ceiling lamps

$3.23Aliexpress
25mm LED PIR Detector Infrared Motion Sensor Switch w/Time Delay Adjustable L15

25mm LED PIR Detector Infrared Motion Sensor Switch w/Time Delay Adjustable L15

$2.31Aliexpress
DiversiTech WS-1 Wet Switch Flood Detector

DiversiTech WS-1 Wet Switch Flood Detector

Category: Misc.
$23.20 - $26.25Amazon
TOPGREENER TDOS5 Occupancy Motion Sensor Light Switch PIR Wall Detector White

TOPGREENER TDOS5 Occupancy Motion Sensor Light Switch PIR Wall Detector White

Category: Sensors & Motion Detectors
$16.99Ebay
THGS LJ18A3 - 8-Z / BX DC6-36V 8 mm Tubular Inductive PROXIMITY Sensor Switch Detector NPN

THGS LJ18A3 - 8-Z / BX DC6-36V 8 mm Tubular Inductive PROXIMITY Sensor Switch Detector NPN

$3.27Aliexpress
12V Motion Sensor Light Switch 5V 12V 24V 5A Movement Sensor Motion Automatic Infrared Timer Detector PIR Switch Photoswitch

12V Motion Sensor Light Switch 5V 12V 24V 5A Movement Sensor Motion Automatic Infrared Timer Detector PIR Switch Photoswitch

$3.55Aliexpress
High Sensitivity Sound Light-operated Switch Voice Sensor Detector LED Lamp Switch On/Off for Corridor Bathroom Lighting AC 220V

High Sensitivity Sound Light-operated Switch Voice Sensor Detector LED Lamp Switch On/Off for Corridor Bathroom Lighting AC 220V

$2.04Aliexpress
Motion Sensor Light Switch Passive Infrared Wall Occupancy Detector

Motion Sensor Light Switch Passive Infrared Wall Occupancy Detector

Category: Sensors & Motion Detectors
$25.99Ebay
TopGreener TDOS5 Indoor Motion Sensor Light Switch PIR Occupancy Detector

TopGreener TDOS5 Indoor Motion Sensor Light Switch PIR Occupancy Detector

Category: Sensors & Motion Detectors
$16.59Ebay
TopGreener TSOS5 PIR Indoor Motion Sensor Light Switch Occupancy Detector

TopGreener TSOS5 PIR Indoor Motion Sensor Light Switch Occupancy Detector

Category: Sensors & Motion Detectors
$16.69Ebay
Maestro Sensor switch, 5A, No Neutral Required, Single-Pole or Multi-Location MS-OPS5MH-WH, White

Maestro Sensor switch, 5A, No Neutral Required, Single-Pole or Multi-Location MS-OPS5MH-WH, White

Category: Tools & Home Improvement
$26.85 - $27.89Amazon
Lutron Maestro Sensor switch, 2A, No Neutral Required, Single-Pole, MS-OPS2-WH, White

Lutron Maestro Sensor switch, 2A, No Neutral Required, Single-Pole, MS-OPS2-WH, White

Category: Tools & Home Improvement
$14.95 - $16.49Amazon
TOPGREENER TDOS5-J-W Motion Sensor Switch, No Neutral Required, PIR Passive Infrared Sensor, Occupancy Sensor Wall Switch, 500W 1/8HP, Ground Wire Required, Single Pole, White

TOPGREENER TDOS5-J-W Motion Sensor Switch, No Neutral Required, PIR Passive Infrared Sensor, Occupancy Sensor Wall Switch, 500W 1/8HP, Ground Wire Required, Single Pole, White

Category: Misc.
$19.45 - $21.99Amazon
Sensky BS010l Dc12v to 24v Mini Pir Motion Sensor Switch,occupancy Sensor Switch (Model 010L)

Sensky BS010l Dc12v to 24v Mini Pir Motion Sensor Switch,occupancy Sensor Switch (Model 010L)

Category: Electronics
$10.99 - $23.20Amazon
GE Z-Wave Plus Smart Lighting Control Motion Sensor Switch, On/Off, In-Wall, Vacancy/Occupancy Sensor, White & Light Almond Buttons, Zwave Hub Required- Works with SmartThings Wink & Alexa, 26931

GE Z-Wave Plus Smart Lighting Control Motion Sensor Switch, On/Off, In-Wall, Vacancy/Occupancy Sensor, White & Light Almond Buttons, Zwave Hub Required- Works with SmartThings Wink & Alexa, 26931

Category: Tools & Home Improvement
$14.95 - $40.34Amazon
TOPGREENER TSOS5-W In Wall PIR Motion Sensor Light Switch, Occupancy Sensor Switch, On/Off Override, Single-Pole, Fluorescent 500VA/ Motor 1/8Hp / Incandescent 500W, Neutral Wire REQUIRED, White

TOPGREENER TSOS5-W In Wall PIR Motion Sensor Light Switch, Occupancy Sensor Switch, On/Off Override, Single-Pole, Fluorescent 500VA/ Motor 1/8Hp / Incandescent 500W, Neutral Wire REQUIRED, White

Category: Misc.
$12.76 - $14.18Amazon
SUPERNIGHT DC 5V-24V 5A PIR Motion Activated Sensor Switch with DC Coupler Cable

SUPERNIGHT DC 5V-24V 5A PIR Motion Activated Sensor Switch with DC Coupler Cable

$10.49 - $27.89Amazon
Sunco Lighting 4 Pack Vacancy & Occupancy Motion Sensor Wall Switch, UL LISTED, Title 24 Qualifed, 180° Field View, Automatic and Manual ON/OFF, Neutral Wire Required, White

Sunco Lighting 4 Pack Vacancy & Occupancy Motion Sensor Wall Switch, UL LISTED, Title 24 Qualifed, 180° Field View, Automatic and Manual ON/OFF, Neutral Wire Required, White

$27.89 - $37.99Amazon
Sensky SK037 3-12M 360 degree PIR Ceiling Occupancy Motion Sensor Infrared Induction Light Motion Sensor Switch (110V-240VAC,1200W)

Sensky SK037 3-12M 360 degree PIR Ceiling Occupancy Motion Sensor Infrared Induction Light Motion Sensor Switch (110V-240VAC,1200W)

$13.42 - $15.99Amazon

Detector Switch Product Descriptions

Lutron Maestro Sensor switch, 2A, No Neutral Required, Single-Pole, MS-OPS2-WH, White

Motion Sensor Switch automatically turns lights ON and OFF.

Detects fine motion 2-3 times better than competition with up to 900 square feet of coverage.

Easily replaces existing switches in all homes - no neutral required and simple button press setup.

Works with all bulb types: 250 Watt incandescent, halogen, ELV; 200 Watt MLV; 150 Watt LED/CFL; 2 amp ballasts.

This single-pole switch is recommended for smaller rooms such as kitches, closets, and laundry rooms.

Coordinating Wall Plate sold seperately (CW-1-WH).

The Collection creates convenience, style, and comfort for every room in your home. Set the perfect mood for entertaining, dining, and relaxing, while experiencing the energy savings and Lamp life extension that Lutron dimmers can provide Maestro products are specifically designed to control many different light sources including: incandescent, halogen, new fluorescent, magnetic low voltage transformers, and electronic low voltage transformers to meet all of your needs.


TOPGREENER TSOS5-W In Wall PIR Motion Sensor Light Switch, Occupancy Sensor Switch, On/Off Override, Single-Pole, Fluorescent 500VA/ Motor 1/8Hp / Incandescent 500W, Neutral Wire REQUIRED, White

Motion sensor switch automatically turns on/off lights, fans, and motors based on the occupancy and vacancy detected in a room.

AUTO mode works as an occupancy sensor (Auto ON, Auto OFF). ON and OFF modes allow you to override the sensor and use the sensor switch as a regular light switch.

Max Sensor Coverage Area 980 sq ft, 180º Field of View. Motion sensor wall switch features adjustable range and sensitivity from 30% to 100%.

Occupancy sensor light switch variable time delay from 15 sec (test mode) to 30 min.

Neutral wire required for installation. 120VAC, Incandescent: 500W, Motor: 1/8HP. Single pole use only. Standard decorator wall plate included.

TOPGREENER TSOS5-W Motion Sensor Light Switch detects room occupancy to automate the On Off Light Control for energy saving and make life easier.
Delay Time Variable delay time between 15 seconds, 10 minutes, 20 minutes and 30 minutes
When you put the slide switch button to AUTO mode, TSOS5 PIR motion-activated sensor will detect motion and turn on load such as a lights, fans, motors, or heaters automatically; and turn off the load when no motion is sensed for preset delay time.
Coverage up to 980 sq. ft
The maximum coverage area is up to 980 sq. ft., 150-degree field of view; sensitivity level is adjustable in 4 positions from 30% to 100%. Passive Infrared PIR sensors detect occupancy by sensing the difference between heat emitted from the human body in motion and background space. Motion Sensor Switch is to provide adequate coverage with-in a space, motion activated sensors utilize a unique Fresnel lens which divides the coverage area into zones, thus enhancing the detection of small movement.

With TOPGREENER'sTSOS5 in-wall motion sensor light switch, you will enjoy the energy efficient benefits and avoid energy waste by preventing lights to turn on at Daylight even when motion is detected.
This motion sensor switch can be done easily by sliding the sliding switch on the front of the motion sensor. Use the TSOS5 as occupancy motion detector sensor, or set it to be in manual OFF or ON mode just like your standard ON/OFF. TOPGREENER's TSOS5 PIR motion sensor light switch is perfect for areas like your hallway, stairway, closet, bathroom garage, and more!

Specifications:

• Incandescent: 500-Watt @ 120 VAC
• Fluorescent: 500-Volt Amp @ 120 VAC
• Motor: 1/8HP @ 120 VAC
• Coverage: 150 degrees, 450 square feet
• Single-Pole use only
• Neutral wire required


Maestro Sensor switch, 5A, No Neutral Required, Single-Pole or Multi-Location MS-OPS5MH-WH, White

Automatically turn lights on and off based on room occupancy.

Uses Advanced XCT sensing technology, offering the most reliable on/off performance with up to 900 square feet coverage.

Works with all bulb types.

Up to 600 W incandescent, halogen, electronic low voltage; 450 W magnetic low voltage; 360 W CFL/ LED, 5 amp ballasts; 3 amp fans.

Requires ground wire.

Automatically turn lights on and off with this wall-mounted switch. turns lights on when anyone enters the room and turns them off when vacant. Detects motions of room occupants. Uses Advanced XCT sensing technology. up to 900 sq ft of coverage. Also features "Ambient Light Detect" mode: lights won't turn on if there is enough natural light present; user may still manually turn lights on. Works with all bulb types. Requires ground wire.


SUPERNIGHT DC 5V-24V 5A PIR Motion Activated Sensor Switch with DC Coupler Cable

Automatic Induction. The light will be activated at night or low-light environments by auto PIR motion detection.

Flexible timing setting from 2s to 360s for how long the light stays on.

0 to 7 meters detecting range and high sensitivity.

Easy to install. Widely used on motion-activated lighting, LED strips and others.

Energy-saving and low heat and low power consumption.

Specification:

Working Voltage: DC5V-24V
Current: 5A
Sensor Method: PIR
Flexible timing setting from 2s to 360s for how long the light stays on.
Cord Length: 0.3M
Detecting Range: 0-7M
Casing: black cover and white lens
Size: 48*25*14mm
Net Weight: 29g


Sensky BS010l Dc12v to 24v Mini Pir Motion Sensor Switch,occupancy Sensor Switch (Model 010L)

Operating voltage: DC5V-25V Load current ≤3A.

Detecting range:4M-7M (10cm-7M adjustable) 110 degrees cone angle.

Delay time: default setting : 5-25s (2~280 Seconds adjustable).

Light Sensor: 20lux (10Lux ~300Lux adjustable).

Size:48*25*14 mm.

Sensky BS010l Dc12v to 24v Mini Pir Motion Sensor Switch,occupancy Sensor Switch


Description:
PIR(Passive infrared) Motion sensor is pyroelectric device can detect human movement by detecting Infrared ray emitted by human body.
Automatic Induction: When people enter into the range of induction, it will output a voltage equal to input voltage, after the delay time, it will output 0V; during the delay time if motion detected, the delay time will reset, and start a new delay time.
widely used on the Motion-activated lighting, LED strips Security System, automatic sensory device and more.

Specifications :
Operating voltage:DC12V
Load current:3A
Delay time(Default setting):5-25s (2~280 Seconds adjustable)
Detecting range : About 110 degrees cone angle
Detecting distance: 4M-7M (10cm-7M adjustable)
Trigger way : continuous triggering
Blockade time: 0 seconds
size: 48*25*14 mm
Attention:
1.Don't exposed to direct sun light or lighting, big wind, near a heater or air condition.
2.Don't fix it at a place where there are obstructing material (e.g. Glass, dense clothes) which IR cannot get though.
3.Don't fix it in strong shock or vibration environment.
4.The PIR Sensor requires a 'warm-up' time in order to function properly, about 10s to1min,depend on the delay time; during this time, the signal triggered by the module is not stable, after one minute, it will be ready.


GE Z-Wave Plus Smart Lighting Control Motion Sensor Switch, On/Off, In-Wall, Vacancy/Occupancy Sensor, White & Light Almond Buttons, Zwave Hub Required- Works with SmartThings Wink & Alexa, 26931

ALEXA COMPATIBLE - REQUIRES AN ALEXA SUPPORTED HUB for voice control with Echo Products (Alexa device and hub sold separately). CANNOT connect directly with ECHO PLUS (Only ZigBee products can connect directly to Echo Plus)..

Requires a Z-Wave certified gateway - Compatible with the following Z-Wave certified Hubs: Pulse, Trane, Wink, Nexia, Honeywell, HomeSeer, Smart Security, Harmony, Vera, Connect and Iris. Works with Alexa for voice control (hub Required, Alexa device and hub sold separately)..

Wirelessly trigger scenes and send alerts when motion detection has turned lights on or off. Remotely monitor with any mobile device (Requires Z-Wave gateway or controller)..

3 Sensitivity Levels - low, medium, high. Multiple Operation Modes: Occupancy - auto ON/auto OFF, Vacancy - manual ON/auto OFF, Manual - manual ON/OFF.

Requires in-wall installation with hard-wired connections - neutral wire required.

Set your life in motion with the GE Z-Wave In-Wall Occupancy/Vacancy Switch. This energy-efficient sensor works with your home's gateway to wirelessly trigger scenes and send alerts for motion with occupancy, vacancy and manual modes. Experience the comfort of automation in your life when you come home to this switch.


TOPGREENER TDOS5-J-W Motion Sensor Switch, No Neutral Required, PIR Passive Infrared Sensor, Occupancy Sensor Wall Switch, 500W 1/8HP, Ground Wire Required, Single Pole, White

Sensor switch detects motion to automatically turn lights on and off based on the occupancy and vacancy in a room.

Motion sensor switch uses a passive infrared (PIR) sensor to reduce false triggers from unwanted movements.

Motion sensor wall switch has universal wiring design with interchangeable hot and load wires makes installation that much easier.

Occupancy sensor mode (Auto ON, Auto OFF) and vacancy sensor mode (Manual ON, Auto OFF) allow you to customize the sensor according to your needs. Fixed time delays: 15 sec (Test), 5 min, 10 min, 20 min, 30 min. Adjustable range.

Neutral wire not required, ground wire required for installation. 120-277VAC, Incandescent: 500W, LED: 150W, Motor: 1/8HP. Works with all bulb types. UL-listed. Wall plate included.

TOPGREENER TDOS5-J Motion Sensor Switch automatically turns ON/OFF the lights and motors according to the motion (occupancy/vacancy) detected in the room.Two modes: In OCC mode lights are automatically turned on when you enter a room and automatically turned off after the room is vacant. This is especially convenient when entering a room with your hands full, such as an entryway, laundry room, garage, etc. The motion detector will deter thieves and allows a surveillance camera to capture clear footage. The motion sensor automatically turns the light on to avoid blind-searching and tripping when entering a dark room. TDOS5-J provides reliable On/Off performance. The sensor can detect fine motions to keep the light on when the room is occupied. When no motion is detected within a period of time the load will turn off automatically. TDOS5-J adopts the embedded circuit with the "photocell" function which gives the motion sensor "intelligence" to sense the light level. Use OCC mode for the kitchen, laundry room, garage, restroom, office, closet, etc. 15 sec to 30 mins adjustable timeout allows users to choose their preferred option. VAC mode is used in rooms that do not need the lights to automatically turn on, such as bedrooms and media rooms. Vacancy mode is another option to choose from, which requires manually turning the light on and automatically turns the light off when the room is vacant.The PIR sensor switch's visually aesthetic design and broad compatibility make it a good choice for you to upgrade your home. This occupancy sensor switch is only for single pole application and needs to be charged in an initial run for at least 3 minutes after installation.While works with NEUTRAL WIRE, no NEUTRAL is required if there is a GROUND WIRE in the junction box! Any black wire connects with load, another one with hot. Easy installation for DIY.


Sunco Lighting 4 Pack Vacancy & Occupancy Motion Sensor Wall Switch, UL LISTED, Title 24 Qualifed, 180° Field View, Automatic and Manual ON/OFF, Neutral Wire Required, White

#1 Rated Motion Sensor.

✔ TECHNOLOGY: This device can detect motion from a heat-emitting source (such a person entering a room) within its field-of-views and automatically turns lights ON and OFF. The controlled lights will remain ON until no motion is detected and time delay has expired. Built-in OCC/VAC buttons offers manual ON or Auto ON. COMPATIBLE with all different kind of bulbs, including: LED, Incandescent, Fluorescent, and Compact Fluorescent Lights..

✔ CONSERVE ENERGY: Using Sunco's Vacancy and Occupancy sensor can reduce energy use by as much as 45%. Improving energy efficiency can reduce emissions that contribute to global warming, mercury contamination in lakes, acid rain, and nuclear waste..

✔ EASY TO INSTALL: Easy to follow installation instructions included with every purchase. It is suitable for indoor use only. FEATURES: Adjustable Time Delay. Adjustable Sensitivity. Light Level Sensing. 180° Field View. UL Listed, which means has passed most rigorous tests for the highest quality product. TITLE 24 Listed, to help save you money. 120/277 VAC, 60Hz. Maximum coverage 600 sf..

✔ APPLICATIONS: private offices, copy rooms, conference rooms, lunch or break room, restrooms, storage rooms, classrooms, common area, bedrooms, closets and any room which would benefit from automatic light control, as well as hallways and stairways, or large spaces with multiple entries. Wall plate INCLUDED. Neutral wire required..


PASSIVE INFRARED TECHNOLOGY

The sensor uses passive infrared (PIR) technology to sense human motion in a controlled space, detect when a space becomes vacant, and turn lighting off automatically after a preset time delay elapses. Users can manually turn lights on or off at any time by operation the ON/OFF button.

ACHIEVE MAXIMUM ENERGY SAVINGS THROUGH SIMPLE & EFFECTIVE SENSOR CONTROL

In most residential, commercial and industrial areas, lights are left on in empty rooms, wasting energy and money. Sunco's sensors automatically turn lights off when they are not needed, for savings and convenience. Selected controls can turn lights on for convenience and security. Sunco's vacancy sensors and occupancy sensors are engineered to meet the needs of users throughout their properties, and comply with energy code requirements.

ENERGY CODE COMPLIANCE

The reduction in energy consumption achieved by Sunco's occupancy sensors is one reason they are mandated energy codes, such as California's Title 24. California requires the installation of high efficacy lighting unless approved lighting controls are installed. Sunco's manual/automatic-on sensors comply with this code.

SAFETY AND SECURITY

Because Sunco's sensors respond instantly to occupancy, they ensure a safe, security lit environment for personnel and visitors alike.

STOP ENERGY WASTE WITH LIGHTING CONTROLS

The easiest and most effective way to save energy in residential, commercial, and industrial areas is to replace standard switches with vacancy and occupancy sensors. 1 pole


DiversiTech WS-1 Wet Switch Flood Detector

Hydrophilic Pad-A high tech polymeric fiber quickly draws water into the sensor array using proven capillary technology.

Stainless Steel Sensor Array-A high tech array of multiple stainless steel sensors detects even a minimal amount of water drawn into the hydrophilic pad.

Double Throw Relay-Allows for wiring to interrupt system and to sound an alarm (by others) when moisture is detected.

The Wet Switch is designed to interrupt the operation of cooling systems. However, it is a water activated switch and can be used in a variety of other applications.

Standard 24VAC control.

The wet switch flood detector is a solid state control designed to help prevent flooding, damage to carpets, walls, furniture, ceilings, etc. It now has a built-in test and reset button for easier installation. It turns the system off when moisture due to condensate or drain leaks is detected. One or two drops will cause Wet Switch to turn off a unit, alerting a serviceman to a moisture problem. A lit LED indicates the Wet Switch is activated and has turned the unit off. Reset simply by drying the absorbent pad with a paper towel and pressing the reset switch. Connects to 24 VAC. More than one unit may be connected to a system. 2 amp contact rating. Simple 5 wire installation. The Wet Switch is placed into the secondary drain pan a normally dry pan. If the primary drain pan fails, condensate water will overflow into the secondary drain pan. Upon sensing moisture, the Wet Switch will turn the system off (typically the cause of the condensing water) to help prevent damage to carpets, walls, woodwork, ceilings, and other property. The Wet Switch is designed to interrupt the operation of cooling systems. However, it is a water activated switch and can be used in a variety of other applications. Features: Hydrophilic Pad A high tech polymeric fiber quickly draws water into the sensor array using proven capillary technology. Integral Feet Integral feet raise the hydrophilic pad and sensor array off the drain pan slightly to prevent nuisance tripping and pan corrosion (metal pans only) from interfering with the sensor array. Stainless Steel Sensor Array A high tech array of multiple stainless steel sensors detects even a minimal amount of water drawn into the hydrophilic pad. Compact Package This technology is packed into a 35/8" diameter by 11/4" high cylinder. Furnished complete with 5conductor 22AWG stranded cable, 6' long. Solid State Electronics Proven electronics prevent mechanical failure in an aggressive operating environment.


Sensky SK037 3-12M 360 degree PIR Ceiling Occupancy Motion Sensor Infrared Induction Light Motion Sensor Switch (110V-240VAC,1200W)

PIR Motion Sensor: Works by detecting human motion infrared rays.

Light Sensor: 3LUX~2000LUX adjustable, Can work in day and night..

Time Delay: 10sec-7min adjustable, Time-Delay is added continually, when it receives the second induction signals after the first induction, it will compute time once more on the basic of the first time-delay rest..

Detection Range: 3-12m adjustable, can be adjusted accordingly, item fits for large room..

Super Occupancy Sensor: 3 detectors for triple overlapping coverage to catch small movements..

Product Description:Sensky BS036 3-12M 360 degree PIR Ceiling Occupancy MotionSensor InfraredInduction Light Motion Sensor Switch (110V-240VAC,1200W)It is an Occupancy Sensor Switch with 360 degree PIR Motion Sensor, 12 M detectiondistance, Time delay, sensor distance and light sensor adjustable. This Motion Sensor Switch can start the load at once andidentify automatically in day and night, when people enter the detection field.Note:Tomake item work in daytime: Adjust the light sensor to the "sun"position (max). To make item work in night (or ambient light less than 3LUX): Adjust lightsensor to the "moon" position (min)

Specification: PowerSourcing:110V/AC-240V/AC Detection Range: 360Power Frequency: 50Hz Working Temperature: -20~+40 Ambient Light: 3-2000LUX (Adjustable) Time-Delay: min: 10sec±3sec max:7min±2min Installing Height: 2.2m~4m Rated Load: 1200W (incandescent lamp) 300W (energy-saving lamp) Detection Motion Speed: 0.6~1.5m/s Detection Distance: 3-12m Power Consumption: 0.45W (work); 0.1W (static)

Package Included:- 1 x Motion Sensor switch- 1 x User Instruction- 2 X Screws