Engraving Machine
43,674 results

Item Price Seller
HTPOW 1000mW Laser Engraving Machine DIY Logo Mark Engraving Machine

HTPOW 1000mW Laser Engraving Machine DIY Logo Mark Engraving Machine

Category: Engraving
$63.0Ebay
NEW HERMES ENGRAVOGRAPH ENGRAVING MACHINE W/ FONT SETS NEW LOW PRICE !

NEW HERMES ENGRAVOGRAPH ENGRAVING MACHINE W/ FONT SETS NEW LOW PRICE !

Category: Engraving
$599.0Ebay
100W CO2 Laser Tube Cutter Engraver Engraving Machine With Cylinder Rotary Axis

100W CO2 Laser Tube Cutter Engraver Engraving Machine With Cylinder Rotary Axis

Category: Engraving
$2840.0Ebay
CNC 1610+2500mw laser GRBL Diy mini CNC machine high power laser engraving machine,3 Axis pcb Milling machine,Wood Router

CNC 1610+2500mw laser GRBL Diy mini CNC machine high power laser engraving machine,3 Axis pcb Milling machine,Wood Router

$250.00Aliexpress
Laserable Rubber NeW Bundle of 5 Pcs Rubber Sheet for Laser Engraving Machine of 2.3mm size

Laserable Rubber NeW Bundle of 5 Pcs Rubber Sheet for Laser Engraving Machine of 2.3mm size

Category: Office Product
$48.98 - $375.00Amazon
Orion Motor Tech 12"x 8" 40W CO2 Laser Engraving Machine Engraver Cutter with Exhaust Fan USB Port

Orion Motor Tech 12"x 8" 40W CO2 Laser Engraving Machine Engraver Cutter with Exhaust Fan USB Port

Category: Office Product
$448.99Amazon
PCB Milling Machine CNC 2020B DIY CNC Wood Carving Mini Engraving Machine PVC Mill Engraver Support MACH3 System

PCB Milling Machine CNC 2020B DIY CNC Wood Carving Mini Engraving Machine PVC Mill Engraver Support MACH3 System

$182.04Aliexpress
benbox 3000mw laser engraving machine cutting maching laser engraver big working area 65*50cm support laser power adjust

benbox 3000mw laser engraving machine cutting maching laser engraver big working area 65*50cm support laser power adjust

$177.45Aliexpress
2016 New cnc engraving machine NEJE 1000mW Automatic DIY Print laser engraver mini USB Engraving Machine Off-line Operation

2016 New cnc engraving machine NEJE 1000mW Automatic DIY Print laser engraver mini USB Engraving Machine Off-line Operation

$69.90Aliexpress
1Pc 35cm Engraving machine metal cutting fluid cooling sprayer / machine spray nozzle / metal cutting / CNC sprayer VEC78 T30

1Pc 35cm Engraving machine metal cutting fluid cooling sprayer / machine spray nozzle / metal cutting / CNC sprayer VEC78 T30

$7.26Aliexpress
Mach3 CNC Z Axis Router Mill Touch Plate Tool Setting Probe New Milling Hot Kit Engraving Machine Tools Auto-Check Instrument

Mach3 CNC Z Axis Router Mill Touch Plate Tool Setting Probe New Milling Hot Kit Engraving Machine Tools Auto-Check Instrument

$5.60Aliexpress
Mophorn Laser Engraving Machine 40W CO2 Laser Engraver 300 x 200mm Laser Cutting Machine with Exhaust Fan USB Port (40W 200X300mm)

Mophorn Laser Engraving Machine 40W CO2 Laser Engraver 300 x 200mm Laser Cutting Machine with Exhaust Fan USB Port (40W 200X300mm)

Category: Office Product
$375.00 - $443.99Amazon
Mophorn Pneumatic Engraving Machine Max 4000RPM/Min 60W Jewelry Engraver Double Ended Impact Graver Jewelry Engraving Machine (Double Ended)

Mophorn Pneumatic Engraving Machine Max 4000RPM/Min 60W Jewelry Engraver Double Ended Impact Graver Jewelry Engraving Machine (Double Ended)

Category: Office Product
$259.99 - $375.00Amazon
OrangeA Ring Engraver for Rings Inner Engraving Inside Ring Engraving Machine Standard Letter Block Stamper Jewelry Ring Engraving Machine Double Sided Dial

OrangeA Ring Engraver for Rings Inner Engraving Inside Ring Engraving Machine Standard Letter Block Stamper Jewelry Ring Engraving Machine Double Sided Dial

Category: Office Product
$229.99Amazon
SUPERCARVER DIY 1000mW Laser Printer Engraver Engraving Logo Carving Machine

SUPERCARVER DIY 1000mW Laser Printer Engraver Engraving Logo Carving Machine

Category: Engraving
$85.99Ebay
High Precise 40W CO2 Laser Engraving Cutting Machine Engraver Cutter USB Port

High Precise 40W CO2 Laser Engraving Cutting Machine Engraver Cutter USB Port

Category: Engraving
$291.86Ebay
1000mW DIY Laser USB Engraver Cutter Engraving Carving Machine Printer CNC USA

1000mW DIY Laser USB Engraver Cutter Engraving Carving Machine Printer CNC USA

Category: Engraving
$86.49Ebay
1000mW DIY Laser USB Engraver Cutter Mark Engraving Carving Machine Printer USA

1000mW DIY Laser USB Engraver Cutter Mark Engraving Carving Machine Printer USA

Category: Engraving
$76.5Ebay
NEJE 1000mW DIY Laser USB Engraver Cutter Engraving Carving Machine Printer CNC

NEJE 1000mW DIY Laser USB Engraver Cutter Engraving Carving Machine Printer CNC

Category: Engraving
$89.88Ebay
Taotuo 500mW Mini Portable USB Laser Engraver DIY Laser Engraving Cutter Printer Machine

Taotuo 500mW Mini Portable USB Laser Engraver DIY Laser Engraving Cutter Printer Machine

$99.99 - $105.23Amazon
HTPOW 1000mw Mini USB Laser Engraver DIY Art Craft Printer Handicraft Engraving Cutting Machine

HTPOW 1000mw Mini USB Laser Engraver DIY Art Craft Printer Handicraft Engraving Cutting Machine

$125.99Amazon
BIQU 2500mw Violet Light DIY Double Motors Laser Evgraving Machine High Engraving Speed Laser Engraver

BIQU 2500mw Violet Light DIY Double Motors Laser Evgraving Machine High Engraving Speed Laser Engraver

Category: Office Product
$105.23 - $399.00Amazon
CNC Router Machine, 3 Axis DIY CNC Engraving Machine PCB Milling Machine 5.12x3.94 inch Effective Working Travel CNC Wood Carving Mini Engraving Router

CNC Router Machine, 3 Axis DIY CNC Engraving Machine PCB Milling Machine 5.12x3.94 inch Effective Working Travel CNC Wood Carving Mini Engraving Router

Category: Misc.
$245.99 - $375.00Amazon
3-Axis Mini Engraver Carving Machine CNC PCB PVC Milling Wood Router DIY Set Kit

3-Axis Mini Engraver Carving Machine CNC PCB PVC Milling Wood Router DIY Set Kit

Category: Engraving
$199.99Ebay
Dremel Electric Compact Decor Mark Metal Engraver Machine Hand Tool Kit Stroke

Dremel Electric Compact Decor Mark Metal Engraver Machine Hand Tool Kit Stroke

Category: Engraving
$21.33Ebay
Engraver Printer , COLEMETER 1000mW USB DIY Engraver Box Mini Art Craft Science Industry Engraving Cutting Machine

Engraver Printer , COLEMETER 1000mW USB DIY Engraver Box Mini Art Craft Science Industry Engraving Cutting Machine

Category: Misc.
$120.99 - $375.00Amazon
15W laser_AS-5, 15000MW diy laser engraving machine,metal engrave marking cnc router machine,metal carving machine,advanced toys

15W laser_AS-5, 15000MW diy laser engraving machine,metal engrave marking cnc router machine,metal carving machine,advanced toys

$359.25Aliexpress
2500mW Laser Power, DIY Mini Laser Engraving Machine, 35*50cm Engraving Area ,Mini Marking Machine, Advanced Toys , Best Gift

2500mW Laser Power, DIY Mini Laser Engraving Machine, 35*50cm Engraving Area ,Mini Marking Machine, Advanced Toys , Best Gift

$229.59Aliexpress
CNC 2418 + 2500mw laser,diy mini cnc engraving machine,Pcb Milling Machine,Wood Carving machine,cnc router,cnc2418,GRBL control

CNC 2418 + 2500mw laser,diy mini cnc engraving machine,Pcb Milling Machine,Wood Carving machine,cnc router,cnc2418,GRBL control

$223.50Aliexpress
Laser_AS-5 15W,metal engraving machine,15000MW diy laser marking machine,laser engraving machine,advanced toys

Laser_AS-5 15W,metal engraving machine,15000MW diy laser marking machine,laser engraving machine,advanced toys

$358.50Aliexpress

Engraving Machine Product Descriptions

HTPOW 1000mw Mini USB Laser Engraver DIY Art Craft Printer Handicraft Engraving Cutting Machine

SUPPORTED SYSTEMS: Supported on Windows Systems-Windows 97/03/7/8/10/XP (Not Supported on UNIX, MAC, Linux);Fits for the Type of Picture Format --JPG/GIF/BMP/DIB/ICO/CUR/PNG;Directly Charged by AC 110V-220V Power Adapter, Simple and Convenient.

ENGRAVE,DECORATE,Or PERSONALIZE A WIDE VARIETY Of MATERIALS:Wood,Plastic,Bamboo,Leather,Paper,Bubinga and other Flammable Materials(Such as:Phone Case,Ornaments,Mouse,Pencil,Name Card,Wallet,Wood/Plastic Comb,Glass Frame,Small Size Wooden Frame,Fruit Skin etc).Please kindly note that the HTOPW Laser Engraver is only Works on Combustible Materials;NOT for Metals, Glass,Stone,Ceramics,Transparent objects; It will cut very Thin Combustible Materials: Paper and Card Stock.

PORTABLE AND STRONG DESIGN: The Engraving Tool Carves by 405nm Blue Violet Laser with Durable Iron Alloy Frame ,a Cool Desktop DIY Laser Engraver Tool for DIYers and Hobbyist,Ideal for Decorative Engraving or Personalizing your Small Items,it will makes your DIY more Stable and Easy.

SAFE AND EASY TO USE:We consider SAFETY a primary concern,that's why we provide the Goggle to Protect Your Eyes when the Laser on Engraving.Can be used offline, Even when leaving the computer,Only connect to charger(5V,2A);512x512 high Resolution Print,Soft Material can Develop the 3D and the Gradient Effect.

1000MW HIGH POWER Laser Engraving Machine with precision laser movement,it allows for DARKER and DEEPER Engravings which can also be had by having the Head move at a Slower Speed.Engrave with 4 different modes: Black&White,Gray Scale (shaded image), Interactive and Offline;With the off line mode, you can disconnect the computer after transferring the image to the engraver.

HTPOW 1000mw MINI Laser Engraver is Designed for the DIY'er,it is a Very Nice Balance of Performance and Value in a very Small Footprint. Engrave, Decorate and Personalize a wide variety of objects and materials:Wood, Plastic,Leather,Paper,Phone Cases,Ornaments,Wallets, Tags,Business Cards.Engrave Your Wedding Date On A Leather Purse For A Special Anniversary Gift Or Wedding Favor, Or Embellish A Small Christmas/Birthday/Holiday Wooden Card With A Lovely Engraved Design,DIY Special Cute Gifts for your Families or Friends.Ideal for Decorative Engraving or Personalizing your Small Items.

Features:
Power:1000mw
Engraving Area: 1.5 inchesx1.5 inches (38x38mm)
Max Size of Carving Object:3.15inches(Width)x2.68inches(Height)xUnlimited(Length)
Product Size: 5.5x5.5x8.4inches
Shell Material: Alloy
Laser Type: Blue Violet Laser
Software: Supported on Windows97/03/7/8/10/XP(Not supported on UNIX, MAC, Linux),The software provides functions for adjusting the placement and scale of the image to be engraved,A simple image editing (paint) function is included

IMPORTANT NOTE:You might need to temporarily shut down the antivirus software before downloading the software. Otherwise some files in the software would be mistaken for virus and deleted by antivirus software.

IF can't Engraving,Possible Problems and Solutions:
1.Please make sure the HTPOW is turned on
2.The Red Power Button on the machine should be on
3.Please check that the power cord is connected with Windows PC
4.It's needs to Calibrate the Focal Length for Different Object

The Carving Burning Time on the Different Material Item
1).Wood:50-60ms
2).Paper:6-10ms
3).Leather/Plastic:20-30ms

Packing List:
1*Laser Engraving Machine
1*Power Adapter
1*USB Data Cable
1*Goggle
1*Guitar Shaped USB Drive (With Software)
2*Small Wood Board


OrangeA Ring Engraver for Rings Inner Engraving Inside Ring Engraving Machine Standard Letter Block Stamper Jewelry Ring Engraving Machine Double Sided Dial

The inner ring engraving machine has 360 degree rotatable jaws,which helps fixing the ring. Tiny carved needle can position accurately.The engraving depth is fixed..

Through shaking the handle, You can turn the ring and adjust the letter spacing..

Ring Engraver Accommodate varieties of rings' shapes and material. Making each ring be a personalized item by engraving names, initials, memorial dates, and so on..

You can use this ring engraver to engrave Arabic numerals, uppercase English letters, and several special signs on the inner side of rings..

Ring Engraver by manual operation, you can fully enjoy the fun of DIY without spending too much physical strength..

Introduction This brand new ring engraver is designed for engraving symbol on the inner side of various rings, it is manual operating, you can enjoy the fun of hand-engraving without spending too much physical strength. This machine is point-engraving type. Gear transmission enables the chuck continue to rotate after each character is engraved. Double sides engraving dial allows engraving on almost all kinds of rings with different size and material. Operation Procedure 1. Put the ring you want to engrave into the chuck and tighten it. 2. Find the character you want to engrave and adjust it just below the needle handle. 3. Slightly depict the character with stylus pen. 4. After finishing engraving, get the ring out. 5. Appreciate your masterpiece,which is clear and delicacy engraving. Item Specifications Height of each character: 1.5mm-2.0mm Rotary angle of the jaw: 360 degree Overall dimension: 480 mm x 310 mm x 330 mm ( 18.9" * 12.2" * 13") Weight: 6.72 kg Please Note: Don't put too much force while depicting. Packing List: 1 x Inside Ring Engraving Machine 1 x Double Sided Dial 1 x User Manual


Engraver Printer , COLEMETER 1000mW USB DIY Engraver Box Mini Art Craft Science Industry Engraving Cutting Machine

Support our professional English design software - ONLY Compatible with WIN system , such as Windows XP / 07 / 08 / 10 , NOT compatible with MAC ;To ensure the machine have a longer life , Do not let the printer works overload , use a five-minute break for a while and then use again.

STRONG & COOL DESIGN - USB Engraver Printer , High precision and stability, with 108 screws and alloy structure that make it strong.

WIDE APPLICATIONS - USB Engraver Printer , Suitable for Carving Seals , PCB , Ivory , Bubinga , Hard Wood , Plastic , Bamboo , Rubber , Leather , Paper ect. Can't engrave any kind of Metal / Aluminum / Acrylic / Glass.

AUTOMATIC POSITIONING - USB Engraver Printer , Unique frame and weak light automatic positioning , Frame positioning makes the image positioning easier , No excess residue , more safe to prevent fire.

Can be used offline, Even if to leave the computer,Only conect the two usb port to charger or power bank ( 5V , 1A ) ; 512 x 512 high Resolution Print . Soft material can print out the 3D and the gradient effect.

Specification:

Material: Acrylic + Aluminum + Stainless Steel
Power: 1000mw
Image formats: jpg
Image Size: 512x512 pixels
Image engraving pattern: Bitmap engraving
Engraving Area: 38x38mm
Product Size: 140*140*213mm
Power mode: Dual USB powered
Supply voltage: 4.2V-5.5V
Supply Current: 1A
Support xp, win7, win8, win10 , Not fit for MAC



Can be carved objects: mahogany, bamboo, paper cards, ivory, leather,
flammable plastic, PCBA, etc and so on. Can NOT engrave Metal/Aluminum/Acrylic.


Packing list:

1 x Engraving Machine
1 x Protective Glasses
2 x Wooden Plate
1 x USB Cable
1 x Power Adapter
1x Disk(with software)
1 x User Manual
2 x Plastics
2x Paper plate




Pls. feel free to contact us by "contact seller" if you have any questions during your trying it.


Mophorn Pneumatic Engraving Machine Max 4000RPM/Min 60W Jewelry Engraver Double Ended Impact Graver Jewelry Engraving Machine (Double Ended)

Type: Double Hand Piece pneumatic engraver machine;Power:60W;.

Rotate Speed :100~4000RPM;Air pressure: 0 - 3 kg / cm2.

Graver Mate gives you enough power to deeply engrave gun and knife steel plus fine control for delicate work in gold and silver,You can hammer set bezels and channels without breaking stones..

This Jewelry Engraver machine equipped with Adjustable air pressure guage also capable of adjusting the strokes per minute. Great for use on a variety of materials such as wood, metal, precious gems, and jewelry..

This pneumatic Jewelry engraver machine is widely used in the field of jewelry, craftwork and ironwork.The advantages of flexible impact force size adjustable rear handle can be mounted on the engraving work is a good helper for carving craftsmen jewelry industry ..

Pneumatic Impact Engraving Machine Graver Jewelry Engraver Double Ended Introduction : The Double Pneumatic Engraver is ideal for crafting, jewelry making, and metal working. Features two different kinds of hand pieces and adjustable speed. Requires 0-3 kg/cm2 air pressure. Requires compressed air 1.4 cfm at 45 psi minimum (40 liters per minute at 3 bar minimum). Specification: Power supply:110V 60HZ Power:60W diameter(L x W x H):262*210*195 (mm) Air pressure:0-3kg/cm*cm rotate speed:100~4000RPM Methods of operation: 1. The first pressure adjustment knob and rotate the handle switch shut down to avoid the pressure too great damage to the pressure in the table and the pressure relief valve 2. power, turn on the power switch. (Light) 3. the position of the changeover switch is set to 1 or 2 4. adjust the air pressure and speed, hand carved handle by stepping foot switch to adjust the pressure knob slowly. Pressure gauge indicates 1.5 ~ 2KG/CM2, adjust the speed knob at the same time, the combination of the two regulation carving handle the biggest impact, pressure adjustment knob is pressed. 5. the relaxing foot switch, carving the handle to stop working, as shown below loaded tool 6. size carved handle switch, turn the the conversion handle set and 2 and 1osition (should go to bits) 7. rotary engraving handle work, turn off the power switch, open the rotating handle switch, adjust the pressure knob 8.hours of work with the footswitch opening increases smooth small to large control impact Features and Advantages: Compared with Single Ended Engraver,the double ended Graver have two advantages: A.The speed is adjustable with double ended Graver. B.Graver double ended comes with two handpieces, one large and one small, which makes it easier for work.


Taotuo 500mW Mini Portable USB Laser Engraver DIY Laser Engraving Cutter Printer Machine

SOFTWARE SUITABLE for Windows 7/8/10/XP,Support our professional English Design Software,Engraving is 10 times faster,Directly Charged by AC 110V Power Adapter, Easy and Convenient.

CARVING MATERIAL:Wood,Bamboo,Leather,Paper,Ivory,Bubinga and other Flammable Materials. CAN'T ENGRAVE METAL,GLASS,STONE,CERAMIC.The Laser Engraving Machine with a Mini Fan, thus making the Surface of the Carved Objects Cleaner and Clearer.

STRONG FRAME DESIGN is made of Iron Alloy with 405nm Blue Violet Laser;the Removable Laser Head is more Convenient for your DIY Life.

TRULY 500MW VIOLET LIGHT LASER HEAD,Can be used offline, Even when leaving the Computer,Only connect the Power Adapter. 512x512 high Resolution Print. Soft Material can print out the 3D and the Gradient Effect.

MAX ENGRAVING AREA:38x38 mm,MAX SIZE of CARVING OBJECT:8cm(Width) x 6.8cm(Height) x Unlimited(Length).

Features:

Power: 500mW
Max Engraving Area: 38x38mm
Max Size of Carving Object:8cm(Width) x 6.8cm(Height)xUnlimited(Length)
Product Size: 140*140*213mm
Shell Material:Alloy
Software: Support Windows 7/8/10/XP
Net weight 1kg

Problems and Solutions
1.Unable to operate machinery
Disconnect the power and restart the machine,return to the initial state.
2.Focusing laser
Rotating laser head lens cap,make the light spot on surfaces together.
3.Can't carved in surfaces
To ensure the carving items not metal or ceramic or glass,and then check the laser focus.
4.Offline carving
If you need offline carving,Restart machine after downloading the program
5.Connect to Computer
Connect the machine and computer, and then start the PC software.If midway disconnected and then reconnected machines,you need to first disconnect connection in software and then connect it.

Notice
1.The product is a laser carving machine for home use, a tool machine, can not be compared with laser carving machine for industrial use
2.Do not use the laser head to point at human or livestock,do not use laser to point at people's eyes, rest the machine to abstract the heat if it continue working for more than 20 minutes.
3.Laser has power.skin exposure to laser is strictly prohibited
4.Laser has some limitation,objects capable of caving include wood,organic glass,corian, paper, double color boards, leather, plastic metal and so on.
5.the caving machine should not be stopped while working,it will wear a damage.
6.not suitable for kids under age of 14

According to Different Material,you should set Different Carving Time Before Carving
1).Wood:50 to 60ms
2).Paper:6 to 10ms
3).Leather:20 to 30ms

Packing List:
1* 500mw DIY USB Laser Engraver
1*AC 110V Power Adapter
1*Data Cable
1*Goggle
1*U-Disk(With Software)
2*Small Wood Board


Orion Motor Tech 12"x 8" 40W CO2 Laser Engraving Machine Engraver Cutter with Exhaust Fan USB Port

Easy-to-use professional grade desktop engraver, suitable for seal engraving, advertisement, art gift, garment, leather, toy, etc..

Engraving area: 12" x 8". Premium focal lens and a 40W CO2 laser tube, resolution up to 1000 dpi..

Capable to cut through up to 3mm on organics or non-metal materials such as bamboo, leather, wood, acrylic, plastics etc..

USB connectivity, compatible with most graphic design programs..

German built bearing Y axis guide rails. Powerful exhaust fan & water cooling..

Notes: 1. This engraver is compatible with CorelDraw , but CorelDraw is NOT included.
Compatible with corelaser (which requires CorelDraw) and laser DRW (compatible with most graphic design programs)
2. Make sure the JPG pictures are of high resolution if you're to use JPG pictures, otherwise the patterns to be engraved might be vague.
3. Use vector grams done by CorelDraw to engrave for ultimate results.
4. The quality of patterns to be engraved depends on a lot of factors: engraving speed, laser power, current amperage etc., all of which should be set correctly according to the manual provided.

K40-3020 Laser:
-Suitable for organic non-metal materials
- USB connectivity, easy observation from your computer
- Compatible with Windows 2000, XP, 7 and 8(both 32 or 54 bit), NOT compatible with iOS system
- Working temperature: 40-104°F
- Working humidity: 5%-95% without condensed steam

Package includes:
1x CO2 Laser Engraver
1x Exhaust Fan
1x Venting Tube
1x Water Pump
1x USB Key & USB Cable
1x Software
1x Manual

Specifications:
Engraving Area: 12" x 8" /300 x 200mm
Laser Power: CO2 Glass 40W rated an estimated 1,000-1,300 hours (cuts up to 3mm wood / acrylic)
Software Interface: Shenzhouyi / Laser Draw Software / Core Draw Software
Material Capability: Organics / non-metal - can mark on treated metals: wood, stone, leather, crystal, paper, and film
Motor Type: Stepper Motor
Vent Attachments: Air Exhaust fan w/ vent pipe
Power Supply: Standard AC 110V
OS Compatibility: Windows 8, 7 (64/32 bit), XP, 2000
Laser / PC Connectivity: USB
Resolution: Up to 1000 dpi
Machine Dimensions: 31.5" X 19.5" X 10"
Net Weight: 67lbs - machine only
Gross Weight: 80lbs


Mophorn Laser Engraving Machine 40W CO2 Laser Engraver 300 x 200mm Laser Cutting Machine with Exhaust Fan USB Port (40W 200X300mm)

Engraving area: 12" x 8"(200X300mm);Laser Type: 40W CO2 laser tube;Resolution Ratio:0.001 in (0.026mm) / (1000DPI).

Engraving Speed:0-13.8 in./s (0-350mm/s);Cutting Speed:0-1.38 in./s (0-35mm/s).

CorelDraw Software Included. CorelDraw has the ability of both NewlySeal and NewlyDraw and so it can be employeed in both carving and cutting works..

This laser engraving machione is easy to use professional grade desktop engraver, suitable for seal engraving, advertisement, art gift, garment, leather, toy etc..

This laser engraver machine is equipped with one 40W water cooling laser tube, suitable for organic non-metal materials such as bamboo, leather, wood, acrylic, plastics etc..

40w Laser Engraver Engraving Machine 300x200mm Woodworking USB Port Description: This brand new DC-KIII CO2 laser engraver is equipped with one 40W water cooling laser tube, high precise stepping motors, high quality control board. It employs an USB port and thus can be connected to your laptop or desktop. By the support of included software, Coreldraw, this machine can work well with multiple graphic formats including EMF/JPG/PLT/WMF. Specifications: Engraving Area: 300 x 200mm Laser Power: CO2 Glass 40W rated an estimated 1,000-1,300 hours (cuts up to 3mm wood / acrylic) Material Capability: Organics / non-metal - can mark on treated metals: wood, stone, leather, crystal, paper, and film Vent Attachments: Air Exhaust fan w/ vent pipe Power Supply: Standard AC 110V Laser / PC Connectivity: USB Resolution: Up to 1000 dpi Interface to Computer: USB Port Laser Type:CO2 Gas Current:0~22mA Maximum Item Size to Engrave: 260*220 *70mm Laser Tube:1000-1300 Hours Laser Power:40W Minimum Shaping Character:0.04 X0.04in (1mm X 1mm) Resolution Ratio:0.001 in (0.026mm) / (1000dpi) Resetting Positioning:≤0.0004 in (0.01mm) Motor Type:Stepper Motor Software Supported: CorelDraw software Power Consumption:≤250W Operating Temperature:32-113F Water Cooling:Water Pump include Recommended Spare Parts/Consumables:Laser Tube, Focal lens,Reflection lens Package List: 1 x CO2 LASER Engraver 1 x Smoke Pipe 1 x Smoke Fan 1 x Water Pump 1 x Power Wire 1 x USB Cable 1 x USB Key 1 x Accessory Bag 1 x Instruction Video 1 x English User Manual


CNC Router Machine, 3 Axis DIY CNC Engraving Machine PCB Milling Machine 5.12x3.94 inch Effective Working Travel CNC Wood Carving Mini Engraving Router

We will send you the instruction and software together with the package..

X,Y,Z Working Area: 13*10*4cm (5.12*3.94*1.58 inch), item size: 25*24*24cm(9.8*9.4*9.4 inch).

Power supply is 110v-220v. Voltage: 24V5A switching power supply and two 12V5A; Spindle: 42MM diameter, 775 motor, Screw: M6 threaded rod (4 mm or screw T8). ; Stepper motor: 42 stepper motors..

PVC Frame, Steel guide rods and precision linear bearings provide maxium accuracy and rigidity..

The package include all parts of the mechanical parts. ( electronic control board, stepper motors, frame, power supply and instruction and software..

This is a miniature CNC engraving machine
Engraving machine is designed for processing Industrial or hobby prototype building, building model making, PCB, advertising Signs, artwork, crafts, aircraft models, RC model parts, etc.
For study and research, it is not suitable for production use.
Requires self-assembly and commissioning, assembly requires a certain mechanical knowledge, And the final quality of the assembly and commissioning of a great relationship.
Included all the components, installation wrench, just to assemble their own, no additional components can be used.

Feature:
Dimensions: 250 * 250 * 270MM (9.8'' * 9.8'' * 10.6'')
X,Y,Z Working Area:130 * 100 * 40mm (5.12 * 3.94' * 1.58 inch)
Carving stroke: 130 * 100MM (5.1'' * 3.9'')
Screw: M6 threaded rod (4 mm or screw T8)
Stepper motor: 42 stepper motors
Voltage: 24V5A switching power supply and two 12V5A
Spindle: 42MM (1.7'') diameter, 775 motor

Customer Questions & Answers:
Q:Does it use software compatible with Mac?
A: Yes, it does.

Q: Can you engrave stainless steel with this machine? specifically tumblers like the yeti.
A: Yes, this machine can engrave stainless steel.

Package include:
1x engraving machine (All parts of the mechanical parts)


Laserable Rubber NeW Bundle of 5 Pcs Rubber Sheet for Laser Engraving Machine of 2.3mm size

SIZE : 2.3mm Thickness in A4 Size.

Color : Green.

Pcs -5.

Odor less ( no smell at all) Already tested with Trotec laser machines The rubber sheet can be cut by laser machine to make stamp for commercial and personal use. The rubber which is melt by the laser-beam will vaporize, this way you get the profiled surface. for example: Text and words or logogram burned out (lasered out) from the surface of rubber sheet.


BIQU 2500mw Violet Light DIY Double Motors Laser Evgraving Machine High Engraving Speed Laser Engraver

This violet laser engraving machine is ideal for amateur laser engraving usage with grayscale printing,low-light positioning and freedom positioning functions.It only need you to connect it to the computer,then you can print any pictures your like with your own creativity.

Can be processed material :wood ,plastic, bamboo, ox horn,opaque plastics ( phone case ) , some leather(eg, purse) ,seals , cardboard , paper, bank cards, discount cards ( non-metallic ) , rubber,photosensitive seal,sponge paper etc.

Can not be processed material :Metals(no matter thick or thin), stones, ceramics, glass,jewelries, reflecting material, colourless and transparent material, soft material.

Made by Aluminum & Acryli material, good looking on appearance, more stable.

Support Windows 7,XP, install the software to your laptop or desktop to engraving your picture.


Specifications:
Equipment Size: 620mm*440mm*205mm(L-W-H)
Engraving Area: 350mm*500mm
Laser Power: 2500mw
Package Weight: 5.5kg
Input Voltage: 12V
Material: stainless steel and acrylic
Number of Axes: X-axis dual Y-axis(Dashboard supports 3-axis)
Accuracy: 0.1mm
Support Windows 7,XP
Main Features: Low light positioning, engraving preview, gray engraving, contour carving, engraving entity
Features:
-The software transfer power, support 100mw/200mw/300mw/500mw/1000mw/1600mw/2500mw
-Rapid replacement of the laser head design + adjustable focal length of the upper and lower design
-The maximum engraving area of 350*500mm
-Thick acrylic + aluminum material production, but also on the appearance of tall solid
-The software is easy to use, free upgrades for life
-Two-motors design, more compact and more precise
-Carving unlimited object height, can be placed directly on top of work(such as directly on the table carving the desktop)
-Parts shipped, upon receipt of the goods need to be assembled before use on your own
-The machine can't be kept working constantly more than 1 hour,the longer it works, the shorter its laser head's life would be
-Note:Please contact us if you need the Software download link Note:
-DIY Vision,This item comes with Spare parts,you should intall it yourself
-DIY use,It can not be used for commercial or large-scale production
Package Included:
1*Laser Engraving Machine
1*Power Adapter
1*USB Cable
1*Protective Glasses
1*Set of Hex Wrench The software download link:
Dropbox:https://www.dropbox.com/sh/07dwg4io1uqdbpa/AAAAQ5oomTeSdMvoEG9AXVSga?dl=0
Note:The assembly instructions is in the disc, if you could not find it please contact us before leave the negative review and feedback, thanks!