LED Tail341,426 results
Category: LED Lights
Category: Tail Lights
Category: LED Lights
Category: Tail Lights
Category: Lights & Reflectors
Category: LED Lights
Category: LED Lights
Category: LED Lights
Category: LED Lights
LED Tail Product Descriptions
MaxxHaul 70460 12V LED Trailer Tail Light (Turn/Stop/Signal - Left/Right-DOT Compliant)
Features high intensity LED trailer lights.
Left hand tail light features 4 white LED's for license plate illuminator.
For trailers 80" wide or less.
Functions as a tail light, turn signals on the side, brake light and as a license plate illuminator.
2-bolt stud with nuts for easy installation. Side lens are with standard bulb..
This MaxxHaul 12V LED Kit includes two combination Class A stop, tail and turn signals that complies with DOT. Super bright LED's will lasts longer than regular bulbs.
2pc 6" Oval RED LED Trailer Tail Lights - Turn Stop Brake Trailer Lights for RV JEEP Trucks (DOT Certified, Grommet & Plug Included)
User Manual available for download under Product Information Details.
SAE & DOT FMVSS-108 Certified with diffused polycarbonate lens..
IP67 submersible waterproof light fixture..
Red lens and 10 LEDs for turn signal, taillights, and parking lights..
Industry standard 3-prong plug with 12" wiring; Black rubber grommet for easy surface mount setup..
OLS 6" 10 LED oval LED trailer lights in red are versatile trailer lights capable of being used as turn signal, brake lights, parking lights, or general trailer lighting. Bright LEDs with light magnifier lens housed in a sealed waterproof durable polycarbonate housing, these 6 inch oval LED tail lights are capable of withstanding all types of weather condition. Rubber grommet and standard three prong plugs are included with the purchase for easy flush mounting of these trailer lights in either vertical or horizontal orientations. DOT approved guaranteeing maximum visibility, the OLS 6" 10 LED oval LED tail lights are a must have to be added to your arsenal of trailer lightings.Interchangeable/Compatible with:
All automobiles and devices equipped with a 8-16 Volt DC power source.Features:
- SAE & DOT FMVSS-108 Certified with diffused polycarbonate lens.
- IP67 submersible waterproof light fixture.
- Red lens and 10 LEDs for turn signal, taillights, and parking lights.
- Industry standard 3-prong plug with 12" wiring.
- Black rubber grommet for easy surface mount setup.
- 2 x Light with grommet
- 2 x 3-prong connector
- Instruction Manual
- Input Current @ 12V: 140mA
Alla Lighting 39-SMD Brilliant Pure Red 3157 3156 High Power 2835 Chipsets LED Lights Bulbs for Replacing Turn signal Blinker Brake Tail Light Lamps
(Set of 2) LED Chips: 39 piecese high quality,high power with high performance 2835 led chips per led bulb ---360 degree full angle illumination with projector lens design.
Each bulb was tested before shipping; Dual filament, big difference between high and low intensity light output, perfect and best value for replacing rear turn signal light, brake tail light, center high mount stop ( 3rd brake ) light, side marker light,etc..
Almost same dimension as the stock halogen/incandescent bulb for best fitment. Cross reference number: 3056, 3156, T25, 3047, 3047LL, 3047K, 3057, 3057ST, 3057K, 3057KX, 3057X, 3057KLCP, 3057LL, 3155, 3155LL, 3157,3157K,3157X, 3157LL, 3157ST, 3157KX, 3357, 3357LL, 3357K, 3457, 3457K, 4057, 4057LL, 4057K, 4114, 4114LL, 4114K, 4157, 4157LL, 4157K,etc..
Color: Brillliant pure red. Compatible with both standard type and CK/SRCK type. Voltage: 12V - 24V,built in stable current IC driver for longer lifespan..
NOT CAN-BUS error free, for some vehicles, it may require to install the load resistor to avoid the turn signal fast blinking or error code on the dashboard. Warranty: fully ONE YEAR guaranteed for the manufacturer defect. ;please check the fitment note application before purchasing..
This listing features one pair (2 pieces) super extremely bright 3157 brilliant red high power led bulbs, especially designed for replacing auto turn signal lights,back up reverse lights,brake lights,tail lights,blinker lights or side marker lights,etc. Specification 1) Package: including 2 pieces extremely bright 3157 red led bulb. 2) LED Chips: 39 pieces high power & high quality 2835 chips per led bulb. 3) Cross Reference: 3047, 3047LL, 3047K, 3057A, 3057ALL, 3057, 3057ST, 3057K, 3057KX, 3057X, 3057KLCP, 3057LL, 3155, 3155LL, 3157A,3157AK,3157,3157K,3157X, 3157LL, 3157ST, 3157KX, 3157NA, 3157NALL, 3157NAK, 3357A, 3357ALL, 3357, 3357LL, 3357K, 3454NA, 3457A, 3457ALL, 3457AK, 3457, 3457K, 3457NA, 3457NAK, 3757A, 3757AK, 3757ALL, 4057, 4057LL, 4057K, 4114, 4114LL, 4114K, 4157, 4157LL, 4157K, 4157NA, 4157NAK, 5702A, 5702AK, 5702AK, 4) Application: Turn signal lights,brake lights,tail lights,side marker lights,blinker light,corner light,etc. 5) Warranty: "One Year" guaranteed on manufacturer quality 6) Please note: Due to led bulbs draw much less current than stock lamp, your car may require load resistor to avoid hyper flash or malfunction.
Alla Lighting 39-SMD High Power 2835 Chipsets Xtremely Super Bright 7443 7440 T20 Red LED Bulbs for Brake Tail Light
(Set of 2) Chips: 39 piecese high quality,high power with high performance led chips per led bulb ---360 degree full angle illumination with projector lens design.
Color: Brilliant pure red;Working Voltage: 12V~18V with built in IC driver for better working performance;.
Fitment: 992, 7440A, 7440AL, 7440NA, 7440, 7440LL, 7440ST, 7440NA, 7441, 7443, 7443LL, 7443ST, 7444NA, W21W,etc.
Application: Used for brake light,tail lights lamp replacement;this bulb CAN fits both Standard and CK/SRCK Type,safe and easy installation..
Warranty: Fully ONE YEAR guaranteed for the manuafacturer defect.please check the fitment note application before purchasing..
This listing features one pair (2 pieces) super xtremely bright high power 2835 39-SMD 7443 brilliant red led bulbs, especially designed for replacing auto turn signal lights,brake light,tail light,backup reverse light,high mount stop lights or side marker lights,etc. Specification 1) Package: including 2 pieces extremely bright 7443 LED bulb. 2) LED Chips: 39 pieces high power 2835 chips per led bulb. 3) Cross Reference: 992,7440A,7440AL,7440NA,7440,7440LL,7440ST,7440NA,7441,7443,7443LL,7443ST,7444NA,W21W,etc 4) Application: Turn signal lights,side marker lights,blinker light,brake light,tail light,corner light,etc. 5) Warranty: "One Year" guaranteed on manufacturer quality 6) Please note: Due to led bulbs draw much less current than stock lamp, your car may require load resistor to avoid hyper flash or malfunction.
LUYED 2 X 900 Lumens Super Bright 3014 78-EX Chipsets 3056 3156 3057 3157 LED Bulbs,Xenon White
√ 2pcs 3157 78-pieces high power 3014 chipsets bulb,Working Voltage:12v-24v,Size: 1.9" x 0.9" x 0.8".
√ Fits: 3156 3056 3356 3456 4156 3047 3157 3157A 3057 3155 3157NA 3357 3457 3457A 4057 4114 4157 etc..
√ Application:back up reverse lights,brake lights,tail lights, etc..
Notice: you might need to add 50W 6-Ohm load resistors or change flash rely to prevent the LED bulbs from hyper flashing,you can serch"50W 6-Ohm.
NOTE:Amazon filter system may not be 100% accurate, The bulb size may vary between trim of your vehicle. Please double check owners manual or original bulb size to confirm before placing an order..
Unique 360 degree lighting ensures optimum visibility
Bulbs are shock and vibration proof
Low heat generation ensures a longer bulb life
If you don't like this product, Please click the Brand name or Search "LUYED", you must be can find your favorite car LED products!
All LUYED products Support 3 months no reason return,If your have product issues,please do not hesitate to contact us
JDM ASTAR Extremely Bright PX Chipsets 3056 3156 3057 3157 LED Bulb For Brake Light Tail lights Turn Signal, Brilliant Red
Package contain one pair PX chipsets led bulbs. Buy with confidence, We offer "ONE YEAR" warranty on item(s) that confirm to be manufacturer defect..
Color:Brilliant Red.Size: 2.60" long and 0.75" in diameter. 21-pieces high power PX chipsets per bulb. It is perfect for customers who are looking for a Extremely bright output.
Fits: 3156 3056 3356 3456 4156 3157 3047 3057 3357 3457 3757 4057 4111 4157 etc..
The difference between running/tail (stage 1) and brake/signal (stage 2) light is great(the high intensity is about triple birhgter than the low intensity).
Used for turn signal lights,brake lights,tail lights,etc.
Wiipro Universal led Harley Davidson Light Strip Tail Brake Stop Turn Signal 32LED 8" Flexible led light for motorcycle
Material: Soft rubber strip with 3528 SMD LED; Fitting Position: License Plate Light.
Led light color: Red for brake and stop, Amber for turn signal.
Size: 20.5*1.3*0.8 cm / 8*0.5*0.3"; Power Cable Length: Approx 60cm.
Voltage: DC 12V; Waterproof Rate: IP 65; Easy Installation: Mount with 3M tape, 5 wires connection.
Perfect turn Signal Brake light and Running tail Light all-in-one for motorcycle, Car, Trailer. Lots of Common uses.
32 LED Run Brake Turn Strip
Clean up the tail section of you bike by removing huge turn signals or badly designed ORNrear brake lights (07-14 Honda 600RR)
Perfect for all Motorcycles and scooters
This Strip Features:
- 120 degree viewing angle 3 Chip 3528 LEDs for wider visibility + Safety
- Industrial strength 3M Self Adhesive Backing
- Self Adhesive Backing
- Simply Clean Surface & Stick On
- Amber Right + Left Turn Signals
- Running Light illuminates Red at 1/2 brightness then Full 100% brightness as Brake
- 16 gauge Teflon coated wire leads that are 2 feet long
- Input voltage of 12 Volts ~ fits Most All Motorcycles)
Wiring & Installation:
- Light bar is a 5-wire hook-up: Running Light, Brake Light, Right Turn, Left Turn, & Ground
- Strip is Flexible ~ will conform to many surfaces ~ Limitless Mounting Options
AMBOTHER 2pcs 6" 22-LED Oval Red Stop/Turn Signal/Brake/Marker/Tail LED Light, Flush Mount for Truck Trailer Trail Bus 12V Red (Pack of 2)
★LED TYPE: 6" Oval 22-LED stop light / turn light /tail light is made from super power 22 diodes / each light (44 total), and the outside dimension with the grommet is 6inch. LED Color: Red. LED Lenc color: Red. These LEDs draw less current, generate less heat and are brighter and light faster than an incandescent bulb..
★FEATRURE: NEVER change a bulb again. All weather proof, Votle: DC12v. Durable lens, protects against corrosin and fading, all weather resistant molded plastic housing. These LED lights are designed to be used in Trucks, trailers, tractors, semi-trailer, Dump, Surface mount design, mounts on any flat surface,.
★MATERIAL: Sealed & waterproof assemblies,PC lens + grommet housing welded together to ensure a permanent and water proof seal..
★INSTALLATION: The size:6.7"*3.22"*0.47", Direct replacement for 6" sealed beam oval lights, Fit in standard 2-1/2" X 6-3/4" oval hole. 3-Wire connection: White Wire--Ground; Red Wire--high brightness; Black Wire--low brightness..
★APPLICATION: Trucks, trailers, tractors, semi-trailer, Dump, bus, special vehicle,etc. For Heavy Duty trucks like Peterbilt, freightliner, international ,Kenworth, mack,etc..
AMBOTHER 2pcs Oval Red Stop/Turn Signal/Brake/Marker/Tail LED Light Flush Mount 6.5 inch 22 Diodes for Truck Trailer Trail Bus 12V
Led Number: 22 LEDS
Lighting Type:Tail Lights
Exterior Part Type: Lighting
Dimensions: 170mm-6.5" long x 82-3.22" wide x 0.47" thickness
Power Draw :12 volts
Brake and turn lights: 0.161 amps
Marker light: 0.007 amps
Mounting Hardware: Not included
Weight: approx 250g
Package box size: approx 8"x3.622"x2" (LXWXH)
White - Ground
Black - Marker lights
Red - Brake & turn lights
1.This is a multi function LED stop, turn, and tail light for trailer applications.
2.Waterproof and corrosion resistant
3.More efficient - provide brighter light with less power
4.Multiple diodes optimize light output
5.Wiring design contains lead wires for power and a ground wire to mount to all surfaces
Universal mount on right side and left side of trailer
1.We provide clear pictures, measurements where possible.
Please check as much as possible to make sure the item is the one that you need.
2. Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)
3.There are no instructions included in this kit.Professional Installation Is Highly Recommended£¡
4.The Compatibility Is Just For Reference. Please Compare The Stop Turn Tail Light With Your Original One Before Purchasing£¡
2x Stop Turn Tail Light
Partsam 2PCS Red 15" 11 LED Trailer Light Bar Sealed Stop Turn Tail Park Third 3rd Brake Light Truck Trailer Clearance Marker ID Bar Waterproof
Partsam ( 2xRed ) Super bright LED Surface Mount 15" light bar, completely sealed & waterproof..
Each light has 11 Super Diodes for a Bright Performance; Polycarbonate lens is sonic welded to the housing..
For use on heavy duty trucks (Peterbilt Freightliner Kenworth Mack Western Star), semi trailers, cargo trailers, boat trailers, work vehicles and a wide or narrow overland vehicle requiring quality DOT rated lighting..
Functions as marker, clearance light, side marker, identification light, stop light, turn light, tail light and brake light..
EASY TO INSTALL: White Wire - Ground; Red Wire - high brightness; Black Wire - low brightness..
Application: for use on heavy duty trucks, semi trailers, cargo trailers, boat trailers, work vehicles and a wide or narrow overland vehicle requiring quality DOT rated lighting.
Brand new, waterproof, Super bright Red LED Surface Mount, Sealed 15" light
Each light has 11 Super Diodes for a Bright Performance.
Functions as Clearance, Side marker or identification light, stop, turn, tail and Backup Reverse light
These light bars have 3 wires for ground, Backup, Stop,turn and tail light.
They have 2 screw holes for mounting
Comes with a Polycarbonate Lens with All Weather Housing for durability
Convert your old incandescent lights to more modern LEDs.
Dimensions: 15.5" x 1.25" x 0.5"
Hole Center to Center is 14-1/2"
3 Wire Connections:
White Wire - the Ground
Red Wire - high brightness, 100% brightness
Black Wire - low brightness, 50% brightness
2 x 15 inch 11 LED Red stop, turn, tail and brake light bar
CZC AUTO 12V LED Submersible Trailer Tail Light Kit for Under 80 Inch Boat Trailer RV Marine (Trailer light kit)
CZC AUTO 12V Submersible LED Trailer Light Kit includes 2 combination stop, tail, turn signal lights, two amber LED marker lights ,25-ft wiring harness,license plate bracket and mounting hardware bag.
Waterproof and Submersible Feature and Testing（2nd Image）：We placed light underwater for 3 hour by 3 times each day ,total 5 days,the light worked great underwater! The lights are definitely waterpoof and submersible.Please make sure wires connect correctly and no electronic short before marine/underwater.
Side lens Light and Side marker lights are ALL LED as well ,NOT any incandescent Bulb! Super bright LED quality ,Complies with DOT standards.
Application for under 80 Inch width towing vechile,like boat trailer truck snowmobile,etc.
CLIENT SUPPORT AND SOME NEW ARRIVAL: Please feel free to contact us at first if there is any problem when you receive or use our products. We are always here to support you. In the product description, there are some new arrivals with very good price you may interest.
CZC AUTO 12V Submersible LED Trailer Light Kit
includes 2 combination stop, tail, turn signal lights, two amber LED marker lights ,25-ft wiring harness ,license plate bracket and mounting hardware bag
Waterproof and Submersible Feature and Testing：We placed light underwater for 3 hour by 3 times each day ,total 5 days,the light worked great underwater! The lights are definitely waterpoof and submersible.Please make sure wires connect correctly and no electronic short before marine/underwater
Each kit have assembly and opearating Instructions for easy installing.
Complies with DOT standards.
Side lens Light and Side marker lights are ALL LED
Super High visibility and Longer Lifetime LED advantage!
Right Tail Light have 16LEDS : 12 rear facing large LEDs and 4 small LEDS-on Side Marker .
Left Tail Light have 21LEDS : 12 rear facing large LEDs ,4 small LEDS-on Side Marker and 5 white LEDs facing down(For license Plate illumination)
Connect the BROWN wire to the towing vehicle's Tail light wire
Connect the YELLOW wire to the towing vehicle's Left Stop&Turn light
Connect the GREEN wire to the towing vehicle's Right Stop & Turn light
Attach the WHITE GROUND wire to the towing vehicle's frame
Frequently bought together:
Warning Tape B071DT18PC http://a.co/d9ZjUo4
Clearance ID Bar B07235MJ61 http://a.co/i0NtHTa
Rectangular Trailer Light Kit B06ZZRL1BG http://a.co/4ouiOZk
RV porch light B076BLCYFM http://a.co/0mN8bhd
License plate light B077Z6WQ6Q http://a.co/erkVnCk
Grab handle B077YXFRQ3 http://a.co/eW1cuBa
Hitch cover B077YXFRQ3 http://a.co/arXNaCZ
Tire gauge B077ZMSY67 http://a.co/3abjKPk