MK10 Extruder Hotend
170 results

Item Price Seller
High Quality MK10 Extruder Hotend M7 thread For Creator Pro, finder, Wanhao D4 and I3, Dremel PowerSpec 3D Printer, 0.2mm~1.0mm

High Quality MK10 Extruder Hotend M7 thread For Creator Pro, finder, Wanhao D4 and I3, Dremel PowerSpec 3D Printer, 0.2mm~1.0mm

$8.72Aliexpress
MK10 Extruder Hotend Heater Block for FlashForge Creator 3D Printer, CNC

MK10 Extruder Hotend Heater Block for FlashForge Creator 3D Printer, CNC

Category: Other Gadgets
$5.95Ebay
MK10 Extruder Hotend for Wanhao Duplicator Maker Select FlashForge 3D Printer

MK10 Extruder Hotend for Wanhao Duplicator Maker Select FlashForge 3D Printer

Category: Other Gadgets
$13.55Ebay
MK10 Extruder Hotend for Wanhao Duplicator Maker Select FlashForge 3D Printer

MK10 Extruder Hotend for Wanhao Duplicator Maker Select FlashForge 3D Printer

Category: Other Gadgets
$13.53Ebay
MK10 Extruder Hotend for FlashForge 3D Printer Wanhao Duplicator i3 Maker Select

MK10 Extruder Hotend for FlashForge 3D Printer Wanhao Duplicator i3 Maker Select

Category: Other Gadgets
$16.97Ebay
MK10 Extruder Hotend for Wanhao Duplicator Maker Select 3D Printer Quality CNC

MK10 Extruder Hotend for Wanhao Duplicator Maker Select 3D Printer Quality CNC

Category: Other Gadgets
$15.97Ebay
mk10 extruder hotend for maker select wanhao duplicator 3d printer quality cnc

mk10 extruder hotend for maker select wanhao duplicator 3d printer quality cnc

Category: Other Gadgets
$27.79Ebay
MK10 Extruder Hotend /w Cooling Block Wanhao Duplicator Maker Select 3D Printer

MK10 Extruder Hotend /w Cooling Block Wanhao Duplicator Maker Select 3D Printer

$18.04Aliexpress
MK10 Extruder Hotend Heater Block fits MP Maker Select Duplicator i3 3D Printer

MK10 Extruder Hotend Heater Block fits MP Maker Select Duplicator i3 3D Printer

Category: Other Gadgets
$5.99Ebay
Funssor MK10 Extruder Hotend /w Cooling Block Wanhao Duplicator Maker Select 3D Printer

Funssor MK10 Extruder Hotend /w Cooling Block Wanhao Duplicator Maker Select 3D Printer

$18.04Aliexpress
WINSINN MK10 Extruder Hotend Kit .4mm Copper Nozzle M7 Thread Heatbreak with PTFE Teflon - For Wanhao / FlashForge / Creator Etc.

WINSINN MK10 Extruder Hotend Kit .4mm Copper Nozzle M7 Thread Heatbreak with PTFE Teflon - For Wanhao / FlashForge / Creator Etc.

$12.98Amazon
RepRap Champion All Metal MK10 Extruder Hotend with thermistor. Upgrade for Wanhao 3D Printer. Made by US company with quality and precision

RepRap Champion All Metal MK10 Extruder Hotend with thermistor. Upgrade for Wanhao 3D Printer. Made by US company with quality and precision

$32.99Amazon
RepRap Champion MK10 Extruder Hotend for Maker Select Wanhao Duplicator 3D Printer Quality CNC - Made by US company with quality and precision

RepRap Champion MK10 Extruder Hotend for Maker Select Wanhao Duplicator 3D Printer Quality CNC - Made by US company with quality and precision

$17.99Amazon
Hotend Heater Block for MK10 Extruder, fits MP Maker Select Duplicator i3

Hotend Heater Block for MK10 Extruder, fits MP Maker Select Duplicator i3

Category: Other Gadgets
$5.97Ebay
Hotend Heater Block for MK10 Extruder, fits CNC FlashForge Creator 3D Printer

Hotend Heater Block for MK10 Extruder, fits CNC FlashForge Creator 3D Printer

Category: Other Gadgets
$5.97Ebay
12V 40W 1/4-in (6.35mm) Ceramic Cartridge Heater for 3D Printer MK10 Extruder/Hotend

12V 40W 1/4-in (6.35mm) Ceramic Cartridge Heater for 3D Printer MK10 Extruder/Hotend

$6.88Amazon
1SET 3D printer Makerbot M7 thread MK10 Extruder brass Nozzle Hotend kit 0.2/0.3/0.4/0.5mm for FlashForge, Wanhao D4 I3, Dremel

1SET 3D printer Makerbot M7 thread MK10 Extruder brass Nozzle Hotend kit 0.2/0.3/0.4/0.5mm for FlashForge, Wanhao D4 I3, Dremel

$9.58Aliexpress
100Pcs MK10 Heat Block For MAKERBOT 2-generation Extruder HotEnd M7 thread Aluminum 20x16x11.5 20*16*11.5mm For 3D Printer

100Pcs MK10 Heat Block For MAKERBOT 2-generation Extruder HotEnd M7 thread Aluminum 20x16x11.5 20*16*11.5mm For 3D Printer

$104.00Aliexpress
100Pcs MK10 Heat Block For MAKERBOT 2-generation Extruder HotEnd M7 thread Aluminum 20x16x11.5 20*16*11.5mm For 3D Printer

100Pcs MK10 Heat Block For MAKERBOT 2-generation Extruder HotEnd M7 thread Aluminum 20x16x11.5 20*16*11.5mm For 3D Printer

$85.78Aliexpress
Winsinn MK10 Heat Block For MAKERBOT 2-generation M7 thread Extruder HotEnd Aluminum 20*16*11.5 20x16x11.5mm For 3D Printer

Winsinn MK10 Heat Block For MAKERBOT 2-generation M7 thread Extruder HotEnd Aluminum 20*16*11.5 20x16x11.5mm For 3D Printer

$16.78Aliexpress
5Pcs/lot 3D Printer Parts Reprap MK10 Aluminum Heater Block All-Metal Extruder For Makerbot 10 HotEnd 20x16x11.5 20*16*11.5mm

5Pcs/lot 3D Printer Parts Reprap MK10 Aluminum Heater Block All-Metal Extruder For Makerbot 10 HotEnd 20x16x11.5 20*16*11.5mm

$8.49Aliexpress
5Pcs Reprap MK10 Aluminum Heater Block All-Metal Extruder For Makerbot 10 HotEnd 20x16x11.5 20*16*11.5mm For 3 D Printer Parts

5Pcs Reprap MK10 Aluminum Heater Block All-Metal Extruder For Makerbot 10 HotEnd 20x16x11.5 20*16*11.5mm For 3 D Printer Parts

$8.50Aliexpress
WINSINN Aluminum MK10 Heater Block For 3D Printer Extruder Hotend M7 Heat Block - RepRap Bowden Makerbot 20x16x11.5mm (Pack of 5Pcs)

WINSINN Aluminum MK10 Heater Block For 3D Printer Extruder Hotend M7 Heat Block - RepRap Bowden Makerbot 20x16x11.5mm (Pack of 5Pcs)

$18.98Amazon
MK10 All Metal Hotend Extruder Kit 0.4mm for CTC/Wanhao/FlashForge / Creator pro / Dreamer / Finder / Guider/Dremel Idea Builder

MK10 All Metal Hotend Extruder Kit 0.4mm for CTC/Wanhao/FlashForge / Creator pro / Dreamer / Finder / Guider/Dremel Idea Builder

$5.70Aliexpress
MK10 Hotend: Nozzle, Throat, Heater Block for FlashForge Wanhao Extruder

MK10 Hotend: Nozzle, Throat, Heater Block for FlashForge Wanhao Extruder

Category: Other Gadgets
$15.98Ebay
WINSINN All Metal MK10 Hotend Extruder Kit Stainless steel .4mm Nozzle M7 Thread Upgrade for Wanhao i3 D4 / FlashForge / Creator pro / Dreamer / Finder / Guider / Dremel Idea Builder / CTC

WINSINN All Metal MK10 Hotend Extruder Kit Stainless steel .4mm Nozzle M7 Thread Upgrade for Wanhao i3 D4 / FlashForge / Creator pro / Dreamer / Finder / Guider / Dremel Idea Builder / CTC

Category: Office Product
$14.98Amazon
Micro Swiss MK10 All Metal Hotend Kit .4mm Nozzle WANHAO, FlashForge, Dremel Idea Builder

Micro Swiss MK10 All Metal Hotend Kit .4mm Nozzle WANHAO, FlashForge, Dremel Idea Builder

Category: Misc.
$37.75Amazon
.4mm Nozzle for Micro Swiss MK10 All Metal Hotend Upgrade Kit

.4mm Nozzle for Micro Swiss MK10 All Metal Hotend Upgrade Kit

Category: Misc.
$14.99Amazon
[initeq] Dual MK10 All Metal Hotend Upgrade Kit for Select MakerBot, FlashForge, CTC and other 3D Printers

[initeq] Dual MK10 All Metal Hotend Upgrade Kit for Select MakerBot, FlashForge, CTC and other 3D Printers

$31.99Amazon
WINSINN 40 Tooth Bore 5mm Drive Gear - Stainless Steel - For Makerbot MK8 Delta Prusa I3 Extruder Hotend Feeder (Pack of 3Pcs)

WINSINN 40 Tooth Bore 5mm Drive Gear - Stainless Steel - For Makerbot MK8 Delta Prusa I3 Extruder Hotend Feeder (Pack of 3Pcs)

$9.56Amazon

MK10 Extruder Hotend Product Descriptions

WINSINN MK10 Extruder Hotend Kit .4mm Copper Nozzle M7 Thread Heatbreak with PTFE Teflon - For Wanhao / FlashForge / Creator Etc.

High Quality, Ensure Concentricity and Roundness..

Size of PTFE liner tube: OD-4mm ID-2mm, length 35mm.

Thermocouples Thread: M4.

Fit for CTC / Wanhao / FlashForge / Creator pro / Dreamer / Finder / Guider / Dremel Idea Builder / Builder PowerSpec 3D / Pro PowerSpec 3D X Etc..

Made by WINSINN.


►WINSINN MK10 Extruder Hotend

►Copper (Nozzle Part), Aluminum alloy (Heater Block Part), Stainless steel (threaded part)

►Nozzle size: 0.4mm

►Thermocouples Thread: M4

►Good price, Good quality, Let's try it:))

---------------------------------------------------------------------------------------------------------------------

Package include:
►1 x MK10 Copper 0.4mm Nozzle
►1 x MK10 Heater Block
►1 x MK10 Heatbreak
►1 x OD-4mm ID-2mm PTFE 35mm

---------------------------------------------------------------------------------------------------------------------

►Note:
In order to avoid the return of waste of your valuable time, please carefully view the product design drawings before purchase, confirm that the product is suitable for your machine or meet your needs.

►We offer the best products and services, if there has any problems, you can tell us anytime. Thank you:))


Micro Swiss MK10 All Metal Hotend Kit .4mm Nozzle WANHAO, FlashForge, Dremel Idea Builder

Upgrade for MK10 Exturders. WILL NOT FIT Original Wooden FlashForge.

Brass Nozzle Plated with TwinClad XT coating HIGH LUBRICITY WEAR RESISTANT.

Kit Includes a Modified Thermal Barrier Tube, Modified Plated Nozzle and Thermal Compound.

Fits: FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, Dremel Idea, Builder PowerSpec 3D, Pro PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3.

Made in USA by Micro Swiss.

This is an all metal hotend upgrade kit for MK10 Extruders. All metal hotend will let you print at much higher temperature than possible with original PTFE lined one. Another benefit of an all metal hotend design is more consistent melt chamber control. During slow extrusion rate, in PTFE lined hotend, transition zone from solid to molten plastic tends to creep upward creating more stringy prints. With all metal design a transition zone is always constant, being located right at the heat break. With fast extrusion rate, PTFE tube doesn't have enough thermal conductivity to properly melt all the plastic coming out. All metal hotend solves this problem, plastic is surrounded by thermally conductive nozzle throughout its length.


.4mm Nozzle for Micro Swiss MK10 All Metal Hotend Upgrade Kit

Nozzle for Micro Swiss MK10 All Metal Hotend Kit.

Nozzle Plated with TwinClad XT Coating HIGH LUBRICITY WEAR RESISTANT.

Upgrade for MK10 Exturders.

Orifice size: .4mm.

Made in USA by Micro Swiss.

This is Micro Swiss MK10 All Metal Hotend ONLY style nozzle, it will ONLY fit our MK10 All Metal Hotend Kit. This nozzle has completely different internal dimensions to work with our Micro Swiss thermal barrier tube. It is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle.


12V 40W 1/4-in (6.35mm) Ceramic Cartridge Heater for 3D Printer MK10 Extruder/Hotend

12 Volt 40 Watt (12v 40w) MK10 3D Printer Ceramic Heater Cartridge with a 1/4-in (6.35mm) Diameter and 1m Wire.

Designed to be the proper OEM fit for 3D printers with a MK10 extruder and a 6.35 mm (1/4 inch) heater block bore.

Compatible with some Wanhao Duplicator, FlashForge Creator, Monoprice Maker Select v1/v2/v2.1 FDM/FFF Printers with 1/4in heater hole.

Length: 20mm / Diameter: 6.35mm - Wire Length: 100cm.

1/4 (0.25in) US Standard Size Often Hard to Find - Used on many American and Chinese Made 3d Printers designed for the US Market.

12V 40W 1/4-in (6.35mm) Ceramic Cartridge Heater
Fits Many MonoPrice/Flashforge/Wanahoo MK10 3D Printers with a 1/4in 6.35mm Bore Heater Hole

Please NOTE: This is a variation listing - You must select your voltage (12v or 24v) from the drop down menu at the top of the page

Specifications:
Product: Single-head heating tube
Diameter: 1/4 inch / 6.35mm
Length: 20mm
Wire Length: 3ft 3in / 1m
Voltage: 12 Volt
Power: 40 Watt

Package Contents:
1pc - 40W 12V Ceramic Heater Cartridge with a 1/4-in (6.35mm) Diameter


WINSINN Aluminum MK10 Heater Block For 3D Printer Extruder Hotend M7 Heat Block - RepRap Bowden Makerbot 20x16x11.5mm (Pack of 5Pcs)

NOTE: This MK10 heater block Size is 20x16x11.5mm.

MK10 Heater Block - For MK10 Extruder Hotend.

For MK10 nozzle (M7 thread).

Hole precision, Excellent material, 1 x Allen wrench, Easy to install.

Made by WINSINN.


►For MK10 Extruder Hotend

►Suitable nozzle: M7 Screw thread

►Material: High quality aluminum alloy

►NOTE: This MK10 heater block Size is 20x16x11.5mm

---------------------------------------------------------------------------------------------------------------------

Package include:
►5 x MK10 Heater Block
►1 x Allen wrench

---------------------------------------------------------------------------------------------------------------------

►Note: In order to avoid the return of waste of your valuable time, please carefully view the product design drawings before purchase, confirm that the product is suitable for your machine or meet your needs.

►We offer the best products and services, if there has any problems, you can tell us anytime. Thank you:))


WINSINN All Metal MK10 Hotend Extruder Kit Stainless steel .4mm Nozzle M7 Thread Upgrade for Wanhao i3 D4 / FlashForge / Creator pro / Dreamer / Finder / Guider / Dremel Idea Builder / CTC

High quality, Ensure Concentricity and Roundness..

Very easy to upgrade for MK10 Hotend Exturders.

Nozzle is Stainless steel 0.4mm.

Upgrade for CTC / Wanhao D4&i3&4S&4X / FlashForge / Creator pro / Dreamer / Finder / Guider / Dremel Idea Builder / Builder PowerSpec 3D / Pro PowerSpec 3D X Etc..

Made by WINSINN.


►Winsinn MK10 Nozzle hotend kit

►Stainless steel(Nozzle Part), Stainless steel(Threaded Part), Aluminum alloy (Upper Part)

►Nozzle size: 0.4mm

►Good price, Good quality, upgrade your printer now. Let's try it:))

---------------------------------------------------------------------------------------------------------------------

Package include:
►1 x MK10 Hotend Stainless steel 0.4 Nozzle
►1 x Stainless steel(Threaded Part)
►1 x Aluminum alloy (Upper Part)
►1 x 0.4 Nozzle Cleaning Needle

---------------------------------------------------------------------------------------------------------------------

►Note:
In order to avoid the return of waste of your valuable time, please carefully view the product design drawings before purchase, confirm that the product is suitable for your machine or meet your needs.

►We offer the best products and services, if there has any problems, you can tell us anytime. Thank you:))


RepRap Champion MK10 Extruder Hotend for Maker Select Wanhao Duplicator 3D Printer Quality CNC - Made by US company with quality and precision

Fits Wahao Duplicator i3 and Maker Select V1, V2, V2.1 and Plus 3D printers.

Correctly machined - will fit your MK10 extruder cooling block with tight tolerance.

This hotend version is for use with thermistor only. For thermocouple MK10 hotend version please look up our store..

Our parts manufactured by US company with high CNC quality and tight tolerance. This hotend will fit all OEM MK10 extruders. This MK10 version is for extruder with thermistors. It has heater block with small hole to accept thermistor and M3 tapped hole for clamping screw with washer. All parts precisely machined and tested on MP Maker Select V2.1 and Plus printers, as well as Wanhao Duplicator i3. Heater block will accept 6.2 mm diameter OEM heater. Please consult with supplied drawing for details Specifications: Nozzle extrusion diameter: 0.4mm
Nozzle, Throat and Heater Block thread size: M7x1
Length: 39.1mm
Size of PTFE liner tube: 4mm OD 2mm ID x 35mm Package contents: 1 x MK10 Extruder Stainless throat barrel, M7x1 threaded.
1 x PTFE liner tubing 4mm OD x 2mm ID.
1 x MK10 Extruder Nozzle, M7x1 threaded.
1 x MK10 Heater block, M7x1 threaded with M3x0.5 tapped hole for clamping screw.


[initeq] Dual MK10 All Metal Hotend Upgrade Kit for Select MakerBot, FlashForge, CTC and other 3D Printers

Upgrade to reliably print high-temperature materials.

Stainless steel and aluminum - no PTFE liner.

Compatible with premium nozzles.

Sold as a pair.

Includes a single tube of thermal grease.

All-Metal Hotend Conversion Kit for MakerBot Replicator Style 3D Printers with MK10 Hotends

Using a hotend without a PTFE liner allows printing of materials that require higher temperatures than the PTFE can handle.

This kit includes the 2 sets of the 3 parts shown - The nozzle and heater block connection are stainless steel, while the shaft that goes into the cooling block is aluminum (this is for better heat dissipation -- you want the filament to stay solid here). Also includes a tube of thermal grease for installation

Compatible with the Micro Swiss hardened and coated nozzles. The included nozzle is a stainless steel, 0.4mm nozzle.

If you currently have MK8 extruders (as our CTC printer did) you will need a dual MK10 cooling block as well, otherwise these won't fit. MK10 Heater Blocks are also differ from the MK8 style - be sure to pick up a 2 pack if you need them (and note the cartridge heater diameter - ours fits 6mm, but others are available)

Adjustments to your slicer settings are often a good idea if upgrading from standard (lined) hotends, especially a reduction in retraction length.


RepRap Champion All Metal MK10 Extruder Hotend with thermistor. Upgrade for Wanhao 3D Printer. Made by US company with quality and precision

Fits Wahao Duplicator i3 and Maker Select V1, V2, V2.1 and Plus 3D printers.

Correctly machined - will fit your MK10 extruder cooling block with tight tolerance.

This is complete RepRap Champion All Metal MK10 extruder hotend with heater block and M3 stud ceramic thermistor uprgrade. This hotend converts any MK10 extruder to all metal extruder. MK10 All Metal extruder upgrade from RepRap Champion is compatible with many 3D Printers models that are currently on the market. Parts were designed for popular 3D printers Wanhao Duplicator 3, maker Select and similar models equipped with MK10 extruders. All Metal hotend allows you to print with much higher temperatures and higher speeds.This particular listing includes heater block for thermistor and M3 stud ceramic thermistor. Please see supplied drawing for part dimensions and details. Package contents: 1 x Brass Nozzle for All metal MK10 Extruder.
1 x Stainless All Metal MK10 throat.
1 x Heater Block with M3 mounting screw, compatible with thermistors.
1 x M3 Stud ceramic glued thermistor NTC 3950 100K.


WINSINN 40 Tooth Bore 5mm Drive Gear - Stainless Steel - For Makerbot MK8 Delta Prusa I3 Extruder Hotend Feeder (Pack of 3Pcs)

High Quality Stainless steel MK10 Drive Gear.

40 Tooth, Bore: 5mm, Height: 12mm.

Pitch: 0.9, Pressure angle: 50 Degrees.

Gift for Allen wrench, Easy to install.

Made by WINSINN.


►For Makerbot MK8 Delta Prusa I3 Extruder

►Number or Teeth: 40T

►Bore: 5mm

►Pitch: 0.9

►Pressure angle: 50 Degrees

►Material: High quality Stainless steel

---------------------------------------------------------------------------------------------------------------------

Package include:
►3 x 40 Tooth Bore 5mm Drive Gear
►1 x Allen wrench---------------------------------------------------------------------------------------------------------------------

►Note: In order to avoid the return of waste of your valuable time, please carefully view the product design drawings before purchase, confirm that the product is suitable for your machine or meet your needs.

►We offer the best products and services, if there has any problems, you can tell us anytime. Thank you:))