NTC Thermistor
7,269 results

Item Price Seller
5x 10k Precision NTC Thermistor, High temp wires - USA SELLER - Free Shipping

5x 10k Precision NTC Thermistor, High temp wires - USA SELLER - Free Shipping

Category: Potentiometers
$3.06Ebay
10 x 100K OHM NTC Thermistor 5mm

10 x 100K OHM NTC Thermistor 5mm

Category: Potentiometers
$2.5Ebay
10 x 1K OHM NTC Thermistor 5mm - USA Seller - Free Shipping

10 x 1K OHM NTC Thermistor 5mm - USA Seller - Free Shipping

Category: Potentiometers
$2.79Ebay
10 x 10K OHM NTC Thermistor 5mm - USA Seller - Free Shipping

10 x 10K OHM NTC Thermistor 5mm - USA Seller - Free Shipping

Category: Potentiometers
$2.5Ebay
10 x 100 OHM NTC Thermistor 5mm. - USA Seller - Free Shipping

10 x 100 OHM NTC Thermistor 5mm. - USA Seller - Free Shipping

Category: Potentiometers
$2.5Ebay
20pcs NTC Thermistor Resistor NTC 10D-11 10D11 Thermal Resistor

20pcs NTC Thermistor Resistor NTC 10D-11 10D11 Thermal Resistor

$1.45Aliexpress
10pcs NTC Thermistor Resistor NTC 47D-15 47D15 Thermal Resistor

10pcs NTC Thermistor Resistor NTC 47D-15 47D15 Thermal Resistor

$1.49Aliexpress
100PCS 10K OHM NTC Thermistor Resistor NTC-MF52AT 10K +/-5% 3950

100PCS 10K OHM NTC Thermistor Resistor NTC-MF52AT 10K +/-5% 3950

$2.85Aliexpress
HICTOP 5 Pcs 100K ohm NTC Thermistors/Temp Sensor for Reprap 3D printer

HICTOP 5 Pcs 100K ohm NTC Thermistors/Temp Sensor for Reprap 3D printer

$0.00Amazon
Uxcell a14092200ux0209 50 Piece 10K Ohm 0.05W 3435B NTC Thermistors Resistor, MF52-103 Type

Uxcell a14092200ux0209 50 Piece 10K Ohm 0.05W 3435B NTC Thermistors Resistor, MF52-103 Type

Category: Misc.
$10.54Amazon
NTC Thermistor accuracy temperature sensor 10K 1% 3950 Waterproof Probe 1m N178

NTC Thermistor accuracy temperature sensor 10K 1% 3950 Waterproof Probe 1m N178

Category: Temperature Probes
$3.5Ebay
High Stability NTC Thermistor 100K with wire RepRap Prusa Mendel Bed or Hot End

High Stability NTC Thermistor 100K with wire RepRap Prusa Mendel Bed or Hot End

Category: Potentiometers
$1.49Ebay
MCIGICM 50pcs 10k OHM NTC Thermistor Resistor NTC-MF52AT 10K +/-1% Thermal Resistor

MCIGICM 50pcs 10k OHM NTC Thermistor Resistor NTC-MF52AT 10K +/-1% Thermal Resistor

$1.56Aliexpress
20pcs MF52AT MF52 B 3950 NTC Thermistor Thermal Resistor 5% 1K 2K 3K 4.7K 5K 10K 20K 47K 50K 100K

20pcs MF52AT MF52 B 3950 NTC Thermistor Thermal Resistor 5% 1K 2K 3K 4.7K 5K 10K 20K 47K 50K 100K

$0.55Aliexpress
IDS 100K ohm NTC Thermistors Temperature Sensor with 2 Pin Female Cable Connector for Reprap 3D Printer, 5 Pcs

IDS 100K ohm NTC Thermistors Temperature Sensor with 2 Pin Female Cable Connector for Reprap 3D Printer, 5 Pcs

Category: Kitchen
$6.67 - $7.09Amazon
Ivelink 12V 40W 620 Ceramic Cartridge Heater and NTC Thermistor 100K 3950 for 3D Printer(Pack of 10pcs)

Ivelink 12V 40W 620 Ceramic Cartridge Heater and NTC Thermistor 100K 3950 for 3D Printer(Pack of 10pcs)

$16.99Amazon
Free Shipping 100pcs=10value*10pcs NTC Thermistor Resistor Kit NTC-MF58 1K 2K 5K 10K 20K 50K 100K 200K 500K 1M +/-5% 3950B

Free Shipping 100pcs=10value*10pcs NTC Thermistor Resistor Kit NTC-MF58 1K 2K 5K 10K 20K 50K 100K 200K 500K 1M +/-5% 3950B

$2.97Aliexpress
UCTRONICS 0-167°F Fahrenheit Digital Temperature Meter Blue LED Display MF55 Type NTC Thermistor Temp Sensor 2-wires Reverse Polarity Protection with Black Case

UCTRONICS 0-167°F Fahrenheit Digital Temperature Meter Blue LED Display MF55 Type NTC Thermistor Temp Sensor 2-wires Reverse Polarity Protection with Black Case

$7.49Amazon
Cylewet 10Pcs 100K Ohm NTC 3950 Thermistor, Temperture Sensor for 3D Printer (Pack of 10) CYT1064

Cylewet 10Pcs 100K Ohm NTC 3950 Thermistor, Temperture Sensor for 3D Printer (Pack of 10) CYT1064

Category: Electronics
$7.28Amazon
Adafruit 10K Precision Epoxy Thermistor - 3950 NTC [ADA372]

Adafruit 10K Precision Epoxy Thermistor - 3950 NTC [ADA372]

$3.99 - $6.67Amazon
1 pc Reprap NTC 3950 Thermistor 100K with 1 Meter Cable Wire For 3D Printer

1 pc Reprap NTC 3950 Thermistor 100K with 1 Meter Cable Wire For 3D Printer

Category: Potentiometers
$1.49Ebay
5pcs New Reprap NTC 3950 Thermistor 100K with 1 Meter wire for 3D Printer N211

5pcs New Reprap NTC 3950 Thermistor 100K with 1 Meter wire for 3D Printer N211

Category: Potentiometers
$4.99Ebay
10pcs NTC 3950 1% 100K ohm Thermistor For 3D Printer Printing Reprap Hotend N212

10pcs NTC 3950 1% 100K ohm Thermistor For 3D Printer Printing Reprap Hotend N212

Category: Potentiometers
$4.2Ebay
100pcs NTC-MF52-103/3435 Thermistor 10K ohm 3435K 1% Thermal Sensor Resistance Resistor

100pcs NTC-MF52-103/3435 Thermistor 10K ohm 3435K 1% Thermal Sensor Resistance Resistor

$5.99Aliexpress
New Arrival 10pcs NTC MF52-103 3435 Thermistor 10K ohm 3435K 1% Thermal Sensor Resistance Resistor

New Arrival 10pcs NTC MF52-103 3435 Thermistor 10K ohm 3435K 1% Thermal Sensor Resistance Resistor

$1.13Aliexpress
RepRap Champion M3 Stud Screw-In thermistor 100K NTC 3950 - drop in replacement, works for any China 3D Printer extruders - Anet, Wanhao, Maker Select etc.

RepRap Champion M3 Stud Screw-In thermistor 100K NTC 3950 - drop in replacement, works for any China 3D Printer extruders - Anet, Wanhao, Maker Select etc.

$9.99Amazon
20pcs Thermistor NTC 10K MF52 3950B Thermistor Temperature Sensor MF52 NTC 3950 B 10K ohm 5% Resistor

20pcs Thermistor NTC 10K MF52 3950B Thermistor Temperature Sensor MF52 NTC 3950 B 10K ohm 5% Resistor

$0.79Aliexpress
Happisland 5pcs NTC 3950 100K Thermistor with 1 Meter Wiring and Female Pin Head for RepRap 3D Printer Heatbed or Hot End

Happisland 5pcs NTC 3950 100K Thermistor with 1 Meter Wiring and Female Pin Head for RepRap 3D Printer Heatbed or Hot End

$8.59Amazon
30PCS/Lot Thermistor Temperature Sensor NTC MF58 3950 B 100K ohm 5% Thermal Resistor 100K Ohm resistance

30PCS/Lot Thermistor Temperature Sensor NTC MF58 3950 B 100K ohm 5% Thermal Resistor 100K Ohm resistance

$1.32Aliexpress
DROK 5Pcs 10k B3950 Temperature Probe, -25°c to 125°c Temp Sensor, 3-Meter/9.8ft Sensitive Stainless Steel NTC Thermistor probe, Computer Temperature Sensor for Car

DROK 5Pcs 10k B3950 Temperature Probe, -25°c to 125°c Temp Sensor, 3-Meter/9.8ft Sensitive Stainless Steel NTC Thermistor probe, Computer Temperature Sensor for Car

Category: Misc.
$6.67 - $12.99Amazon

NTC Thermistor Product Descriptions

Happisland 5pcs NTC 3950 100K Thermistor with 1 Meter Wiring and Female Pin Head for RepRap 3D Printer Heatbed or Hot End

Pack of 5PCS.

Temperature sensor 100KΩ accuracy of ± 1%.

Wiring length: 1 meter.

Use it with heated bed or extruder.

Conviniently pre-wired with 1 meter long high temperature PTFE insulated wiring.

Package List: 5* NTC 3950 100k thermistor with female head


UCTRONICS 0-167°F Fahrenheit Digital Temperature Meter Blue LED Display MF55 Type NTC Thermistor Temp Sensor 2-wires Reverse Polarity Protection with Black Case

This 0-167°F Fahrenheit Digital Temperature Meter is easy to setup and read.

It is design with reverse polarity protection, positive and negative reversed will not burn, but the screen display nothing.

Temperature measuring range: 0-167°F Fahrenheit. The display format is with integer.

Temperature sensor using MF55 type of NTC thermistor, epoxy potting, can be used in water, NOTE: the water temperature should not exceed 167 ° F.

Operating voltage: 4.5-28V. Wiring is simple, then the red is for positive, and black for negative.


Name: Blue LED 0-167°F digital thermometer

Features:
Dimension:48x29x29mm
Cutting size: 46x27mm
Display size: 35x16.5mm
Display: three 0.56" blue LED
Measure temperature range: 0-167°F
Tolerance: 1% (+/- 1 word)
Sensor length: 30cm
Power cord length: 18cm
Refresh rate: about 200mS / time
Operating temperature: 14-149 ° F
Operating voltage: DC4.5-28V
Display color: blue
Case color: black
Reverse polarity protection
Sensor: NTC Thermistor (MF55), epoxy potting
Measuring temperature: 0-167 ° F (waterproof)

Package Including:
1pcs 0-167°F Digital Temperature Meter Blue LED Display
1pcs NTC Thermistor


Ivelink 12V 40W 620 Ceramic Cartridge Heater and NTC Thermistor 100K 3950 for 3D Printer(Pack of 10pcs)

Thermistor Color : white,Cartridge Heater Material: 304 Stainless Steel.

Voltage: 12v, Power: 40w,Diameter: 6mm ; Length: 20mm.

Temperature sensor 100KΩ accuracy of ± 1%.

Conviniently pre-wired with 1 meter long high temperature teflon insulated wiring.

Support for NTC 3950 is included in Marlin firmware, use TEMP_SENSOR 11 in firmware configuration.

Cartridge Heater Description
-Cartridge heaters is consist of a cylindrical stainless steel tube and thus provide a high corrosion prevention
-The heating wire inside which is wound onto a ceramic core
-The number of coils varies depending on the power, and provide a great uniform distribution of heat, which considerably increases the long life of the heater as well as prevents the oxidation of the heater wire even at high temperatures
-The solids, liquids, and gases need to be heated by cartridge heater, transmit heat quickly by conduction if the producer of the heat (the cartridge) is in direct contact with the heat sink (any solid, liquid, or gas)
-Widely used for manufacturing plastic and rubber parts in the car industry or in the food processing industry, etc

Cartridge Heater Application
-Semiconductor chamber heating
- Semiconductor wafer lead connection
-Semiconductor wire and die bonding
-Freeze protection and deicing of equipment in cold climates or applications
-Humidity Control
- Patient Comfort heating used in medical devices
-Mold die and platen heating
-Seal bars used in packaging equipment
-Test sample heating in gas chromatography

Thermistor Specification

- For 3D printers: use TEMP_SENSOR 11 in Marlin firmware
- Small Size: 1.25mmx2.0mm glass bead
- High accuracy: 1%
-Resistance value at 25°C=100K
-Wiring insulation: high temperature teflon/PTFE
-Wiring length: 1 meter

Package List

Package Included
5*12V Cartridge Heater with 1m wiring
5* NTC 3950 100k thermistor


DROK 5Pcs 10k B3950 Temperature Probe, -25°c to 125°c Temp Sensor, 3-Meter/9.8ft Sensitive Stainless Steel NTC Thermistor probe, Computer Temperature Sensor for Car

Wide Measuring Range: DROK digital thermometer probe is able to tolerate the widest measuring range (-25°c to 125°c (-13℉ to 257℉))..

High-quality Stainless Steel Probe: This temperature test probes has 5*25mm stainless steel housing, which is waterproof, moisture-proof and anti-rust..

Advanced Technology: DROK smart temp probe adopts sensitive and reliable NTC thermistor and connected by PVC wire, 3 meter lead length (9.8ft), available for remote temperate measuring and controlling..

Wide Application: This multifunctional test probes can be used in household air conditioner, refrigerator, water fountain, drying box, constant box, etc..

Parameters:
Type : NTC 10K/B3950 1%
Measurement range : -25°c to 125°c (-13℉ to 257℉)
Head Size : 5 x 25 mm / 0.2" x 1" (D*L)
Connector: 2 Pin JST XH2.54mm Plug
Resistance : 10K Ohm;
Accuracy : 1%;
Total Length : 3 meters (9.8ft)

Applications:
These can be used in temperature measurement and control of household air conditioners, car air conditioners, refrigerators, freezers, water heaters, water dispensers, dishwashers, washing machines and dryers.

Package includes:
5x temperature Probe cables


Uxcell a14092200ux0209 50 Piece 10K Ohm 0.05W 3435B NTC Thermistors Resistor, MF52-103 Type

Product name: NTC thermistor; model: mf52-103; insulation material: ceramic.

Color: black; rated power: 0. 05W; resistance value: 10K Ohm.

B value: 3435(+/-1 percent ); pin Pitch: 1. 5mm / 0. 059 inch.

Pin Size: 0. 3 x 27 mm / 0. 01" x 1. 06" (DEL); body Size (approx. ): 2 x 2 mm / 0. 079" x 0. 079" (d*t).

Weight: 6G; package content: 50 pcs (+/- 2 percent ) x NTC thermistors.

The NTN thermistors are ethoxyline resin-enveloped thermistors in small size. Used for temperature measurement. Applications: air condition equipments, heating apparatus, electric thermometers, liquid level sensors, automobile electricity, electric table-board, battery of mobile telephones, etc.


Cylewet 10Pcs 100K Ohm NTC 3950 Thermistor, Temperture Sensor for 3D Printer (Pack of 10) CYT1064

The head is pretty sturdy.

Resistance (R25℃): 100K ohm + / - 1%<br>.

B value: 3950K + / - 1%<br>.

Accuracy: + / - 1%<br>.

Glass Packaging: 2.0mm + / - 0.2mm; Lead Length: 32mm + / - 5mm.

The head is pretty sturdy
Resistance (R25℃): 100K ohm + / - 1%
B value: 3950K + / - 1%
Accuracy: + / - 1%
Glass Packaging: 2.0 + / - 0.2mm; Lead Length: 32 + / - 5mm

Package Includes:
10× 100Kohm NTC Thermistor


RepRap Champion M3 Stud Screw-In thermistor 100K NTC 3950 - drop in replacement, works for any China 3D Printer extruders - Anet, Wanhao, Maker Select etc.

Drop-in replacement for Wanhao Duplicator i3, Maker Select V1, V2, V2.1 3D printers.

Drop-in replacement thermistor for almost any China made 3D printer.

Works with Anet, HIctop, Tronxy, Creality, V6 hotend and many others.

New 2107 Version with working temperature up to 300C. Leads insulated with fiberglass, thermistor glued with 600C rated ceramic compound. Screw-in Thermistor based on widely used NTC 3950 100K thermistor. Hex brass body with M3x0.5 threaded stud allows you to easily screw the thermistor into a M3 hole with zero chance of it falling out halfway through a print. The thermistor leads are insulated in fiberglass Tubing, 2 Pole JST Style Connector is attached to the leads ends. Connection cable with mating JST connector for connecting with 3D printer electronics is included. Thermistor glued in housing with high temperature 600C rated ceramic glue. Maximum allowed temperature for prolonged time is 300C. NTC3950 100K HEX Thermistor features: Maximum temperature: 300C
Use TEMP SENSOR number 11 in Marlin
Beta value: 3950 K
Accuracy: +/- 1%
Resistance under 25C: 100K
Compatible with V6 hotends and many other types of hotend and extruders with M3 threaded hole in heater block. Package contents: 1 x NTC 3950 100K Stud Modular Thermistor with HEx body and M3 Stud.
1 x Connection cable.
1 x JST Male Connector.
2 x JST Crimp Pins


Adafruit 10K Precision Epoxy Thermistor - 3950 NTC [ADA372]

Adafruit Part Number: 372.

Stock Type: Sensors >> Temperature.

In Stock & Ready to Ship.

Need to measure something damp? This epoxy-coated precision 1% 10K thermistor is an inexpensive way to measure temperature in weather or liquids. The resistance in 25 °C is 10K (+- 1%). The resistance goes down as it gets warmer and goes up as it gets cooler. For specific temperature-to-resistance, check the lookup table .

These are often used for air conditioners, water lines, and other places where they can get damp. The PVC coating of the wires is good up to 105 °C so this isn't good for very hot stuff.

We even toss in an additional 1% 10K resistor which you can use as calibration or for a resistor divider.

We have a great detailed tutorial on how thermistors work and how to use this one best!