Threading Alignment
229 results

Item Price Seller
5/8"-24 Threading Alignment Tool (TAT) for .308 / 7.62mm Die Starter

5/8"-24 Threading Alignment Tool (TAT) for .308 / 7.62mm Die Starter

Category: Smithing Equipment
$10.99Ebay
1/2-28 Threading Alignment Tool (TAT) Die Starter for 9mm - Gunsmithing

1/2-28 Threading Alignment Tool (TAT) Die Starter for 9mm - Gunsmithing

Category: Misc.
$19.99Amazon
5/8"x24 Threading Alignment Tool (TAT) Die Starter for 9mm - Gunsmithing

5/8"x24 Threading Alignment Tool (TAT) Die Starter for 9mm - Gunsmithing

Category: Smithing Equipment
$14.25Ebay
5/8-24 Threading Alignment Tool (TAT) Die Starter for .308 - Gunsmithing

5/8-24 Threading Alignment Tool (TAT) Die Starter for .308 - Gunsmithing

Category: Smithing Equipment
$14.25Ebay
5/8-24 Threading Alignment Tool (TAT) Die Starter for .308 - Gunsmithing

5/8-24 Threading Alignment Tool (TAT) Die Starter for .308 - Gunsmithing

Category: Tools & Hardware
$19.98Amazon
*Stainless Steel* 5/8-24 Threading Alignment Tool (TAT) Die Starter for .308

*Stainless Steel* 5/8-24 Threading Alignment Tool (TAT) Die Starter for .308

Category: Smithing Equipment
$11.99Ebay
1/2"-28 Threading Alignment Tool (TAT) Die Starter for 7.62mm - Gunsmithing

1/2"-28 Threading Alignment Tool (TAT) Die Starter for 7.62mm - Gunsmithing

Category: Smithing Equipment
$14.25Ebay
1/2"-28 Threading Alignment Tool (TAT) Die Starter for 5.56mm - Gunsmithing

1/2"-28 Threading Alignment Tool (TAT) Die Starter for 5.56mm - Gunsmithing

Category: Misc.
$19.99Amazon
5/8"-24 Threading Alignment Tool (TAT) Die Starter for 7.62mm - Gunsmithing

5/8"-24 Threading Alignment Tool (TAT) Die Starter for 7.62mm - Gunsmithing

Category: Misc.
$19.99Amazon
22mm x 0.75 Threading Alignment Tool (TAT) Die Starter for 12ga - Gunsmithing

22mm x 0.75 Threading Alignment Tool (TAT) Die Starter for 12ga - Gunsmithing

Category: Smithing Equipment
$19.99Ebay
.578"x28 Threading Alignment Tool (TAT) Die Starter for .45 Cal - Gunsmithing

.578"x28 Threading Alignment Tool (TAT) Die Starter for .45 Cal - Gunsmithing

Category: Smithing Equipment
$14.99Ebay
1/2-28 Threading Alignment Tool (TAT) Die Starter for 7.62mm - Gunsmithing by NTC

1/2-28 Threading Alignment Tool (TAT) Die Starter for 7.62mm - Gunsmithing by NTC

Category: Misc.
$19.99Amazon
1/2"-20 Threading Alignment Tool (TAT) Die Starter for .22 / .223 - Gunsmithing

1/2"-20 Threading Alignment Tool (TAT) Die Starter for .22 / .223 - Gunsmithing

Category: Smithing Equipment
$14.25Ebay
1/2"-28 Threading Alignment Tool (TAT) Die Starter for .22 / .223 - Gunsmithing

1/2"-28 Threading Alignment Tool (TAT) Die Starter for .22 / .223 - Gunsmithing

Category: Misc.
$15.99Amazon
9/16"-24 Threading Alignment Tool (TAT) Die Starter for .22 / .223 - Gunsmithing

9/16"-24 Threading Alignment Tool (TAT) Die Starter for .22 / .223 - Gunsmithing

Category: Smithing Equipment
$14.25Ebay
*Stainless Steel* 1/2-28 Threading Alignment Tool (TAT) Die Starter for .22/.223

*Stainless Steel* 1/2-28 Threading Alignment Tool (TAT) Die Starter for .22/.223

Category: Smithing Equipment
$9.99Ebay
M14X1 LH Barrel Threading Die Starter Gunsmith Guide (TAT) Threading Alignment Tool (7.62)

M14X1 LH Barrel Threading Die Starter Gunsmith Guide (TAT) Threading Alignment Tool (7.62)

Category: Misc.
$19.99Amazon
5/8"-24 RH Barrel Threading Die Starter Gunsmith Guide (TAT) Threading Alignment Tool (6.5mm)

5/8"-24 RH Barrel Threading Die Starter Gunsmith Guide (TAT) Threading Alignment Tool (6.5mm)

Category: Misc.
$19.99Amazon
5/8"-24 RH Barrel Threading Die Starter Gunsmith Guide (TAT) Threading Alignment Tool (.45 ACP)

5/8"-24 RH Barrel Threading Die Starter Gunsmith Guide (TAT) Threading Alignment Tool (.45 ACP)

Category: Misc.
$19.99Amazon
Barrel Threading Die Starter Gunsmith Alignment Tool (TATs) M22 x 0.75 RH Right Hand (Vepr12 / Mossberg 500)

Barrel Threading Die Starter Gunsmith Alignment Tool (TATs) M22 x 0.75 RH Right Hand (Vepr12 / Mossberg 500)

Category: Misc.
$24.99Amazon
WHEEL UP 2017 New Professional Alignment Crank Thread 6061 Aluminum Alloy colorful MTB Mountain Road Bicycle Bike Padel

WHEEL UP 2017 New Professional Alignment Crank Thread 6061 Aluminum Alloy colorful MTB Mountain Road Bicycle Bike Padel

$25.46Aliexpress
WHEEL UP 2017 New Professional Alignment Crank Thread 6061 Aluminum Alloy colorful MTB Mountain Road Bicycle Bike Padel

WHEEL UP 2017 New Professional Alignment Crank Thread 6061 Aluminum Alloy colorful MTB Mountain Road Bicycle Bike Padel

$31.66Aliexpress

Threading Alignment Product Descriptions

1/2"-28 Threading Alignment Tool (TAT) Die Starter for .22 / .223 - Gunsmithing

Stainless Steel.

For sale is a simple threading alignment tool (TAT), otherwise referred to as a die starter for .22 / .223 caliber rifles and 1/2"x28 TPI dies made of stainless steel. The purpose of this tool is to squarely guide the die onto the barrel of the gun, eliminating the chance of crooked threading so you can attach muzzle brakes, flash hiders and other barrel mounted attachments requiring this pitch thread with ease. These TATs are approximately 1.5" long, the threaded portion is 1/2", the bore side is 1" long and is slightly under .22 (as it is not uncommon to see bores that vary in size). Please feel free to ask any questions, we're always happy to help! Frequently asked questions: Q: The TAT seems loose inside the barrel, why? A: They are turned just to under .22 to accommodate mild variations in bore size, you can take a gun cleaning patch, put it on the end of the TAT, reinsert it into the barrel and that should solve the problem nicely. Q: I should put the TAT into the barrel, then run the die down it and directly onto the barrel, correct? A: No, actually - you should always thread the TAT into the start side of the die first so there is a gap between the first cutting threads and the TAT, otherwise you may strip the TAT if you don't catch the barrel with the first turn. (Remember, the purpose of this tool is ONLY to align the die at a perfect 90 degrees to the barrel) Q: My die doesn't thread down the TAT easily, what is going on? A: Put simply, not all dies are exactly the same (this TAT was designed for the adjustable gunsmithing dies we carry), but this isn't a problem in most cases though - use a shop rag or something soft and with light clamping pressure, secure the TAT in your shop vise and carefully run your die down it - this should eliminate the majority of issues.


1/2-28 Threading Alignment Tool (TAT) Die Starter for 7.62mm - Gunsmithing by NTC

1/2-28 Threading Alignment Tool (TAT) Die Starter for 7.62mm - Gunsmithing.

For sale is a simple threading alignment tool (TAT), otherwise referred to as a die starter for 7.62 caliber rifles and 1/2"x28 TPI dies. The purpose of this tool is to squarely guide the die onto the barrel of the gun, eliminating the chance of crooked threading so you can attach muzzle brakes, flash hiders and other barrel mounted attachments requiring this pitch thread with ease. These TATs are approximately 1.5" long, the threaded portion is 1/2", the bore side is 1" long and is slightly under 7.62mm (as it is not uncommon to see bores that vary in size). They are also made of aluminum, not steel, as aluminum is more forgiving to the interior of the barrel.


1/2"-28 Threading Alignment Tool (TAT) Die Starter for 5.56mm - Gunsmithing

Stainless Steel.

For sale is a simple threading alignment tool (TAT), otherwise referred to as a die starter for 5.56mm caliber and 1/2"x28 TPI dies. The purpose of this tool is to squarely guide the die onto the barrel of the gun, eliminating the chance of crooked threading so you can attach muzzle brakes, flash hiders and other barrel mounted attachments requiring this pitch thread with ease. These TATs are approximately 1.5" long, the threaded portion is 1/2", the bore side is 1" long and is slightly under 5.56mm (as it is not uncommon to see bores that vary in size). Please feel free to ask any questions, we're always happy to help! Frequently asked questions: Q: The TAT seems loose inside the barrel, why? A: They are turned just to under 5.56mm to accommodate mild variations in bore size, you can take a gun cleaning patch, put it on the end of the TAT, reinsert it into the barrel and that should solve the problem nicely. Q: I should put the TAT into the barrel, then run the die down it and directly onto the barrel, correct? A: No, actually - you should always thread the TAT into the start side of the die first so there is a gap between the first cutting threads and the TAT, otherwise you may strip the TAT if you don't catch the barrel with the first turn. (Remember, the purpose of this tool is ONLY to align the die at a perfect 90 degrees to the barrel) Q: My die doesn't thread down the TAT easily, what is going on? A: Put simply, not all dies are exactly the same (this TAT was designed for the adjustable gunsmithing dies we carry), but this isn't a problem in most cases though - use a shop rag or something soft and with light clamping pressure, secure the TAT in your shop vise and carefully run your die down it - this should eliminate the majority of issues.


1/2-28 Threading Alignment Tool (TAT) Die Starter for 9mm - Gunsmithing

Material: US made 303 Stainless Steel.

This is a simple TAT (thread alignment tool) for re-threading 9mm caliber muzzles to accept 1/2-28 RH muzzle devices. It helps you get the die started level and on-center to prevent costly mistakes.


5/8"-24 Threading Alignment Tool (TAT) Die Starter for 7.62mm - Gunsmithing

Stainless Steel.

5/8"-24 Threading Alignment Tool (TAT) Die Starter for 7.62mm - Gunsmithing ...


5/8-24 Threading Alignment Tool (TAT) Die Starter for .308 - Gunsmithing

Stainless Steel.

This is a simple TAT (thread alignment tool) for re-threading 7.62 caliber muzzles to accept 5/8 - 24 RH muzzle devices. It helps you get the die started level and on-center to prevent costly mistakes. Material: US made 303 Stainless Steel